spar urathane over epoxy

Finishes, paints and coatings

Re: spar urathane over epoxy

Postby tony.latham » Thu Jun 08, 2017 8:59 pm

Atomic77 wrote:There are epoxies today that have very good UV inhibitors built in to stop yellowing of the epoxy on things such as table tops sitting near a window. Even though these supposedly work well, all the literature I've read by the manufacturers say they still do not recommend outdoor use. So sounds like a top coat is still necessary.


Thanks for the update on that.

Hope you're having a good day.

Tony
User avatar
tony.latham
Gold Donating Member
 
Posts: 7011
Images: 17
Joined: Mon Jul 08, 2013 4:03 pm
Location: Middle of Idaho on the edge of nowhere

Re: spar urathane over epoxy

Postby aggie79 » Sun Jun 11, 2017 8:11 pm

As recommended by another person on this forum, I used Target Coatings EM9300 over the epoxy on my tongue box. Still waterproof, clear and shiny after many years.

https://www.targetcoatings.com/product/emtech-em9300-wb-exterior-polycarbonate-urethane/

The tongue box can be quite a target for rock and dirt thrown up by the tow vehicle. The EM 9300 must be pretty tough stuff as I don't have dings or penetrations from road debris.
Tom (& Linda)
For build info on our former Silver Beatle teardrop:
Build Thread

93503
User avatar
aggie79
Super Duper Lifetime Member
 
Posts: 5405
Images: 686
Joined: Tue Aug 07, 2007 5:42 pm
Location: Watauga, Texas

Previous

Return to Skinning secrets

Who is online

Users browsing this forum: No registered users and 1 guest