#1

[ghcoe]

Next it was back to the galley. I got a great price on this granite counter top. It had a small chip in it and they were letting it go for a fraction of the cost..... It is going to add about 50lbs to the trailer, but I figured I had some weight to spare and it's Granite!

Granite

20170709_080415s.jpg (300.05 KiB) Viewed 6850 times

Just kidding!

It is not granite, it is a paper bag floor technique applied to my wood counter. I also applied the same technique to the shelves and back splash of my galley.

Here is my test piece with the different colors I had laying around. We liked the middle color the best.

Color test

20170704_123654s.jpg (340.14 KiB) Viewed 6850 times

[ghcoe]

Here is a close up of the pattern.

Back splash

20170704_123444s.jpg (280.94 KiB) Viewed 6848 times

The shelves and back splash. There is no color applied here.

Outlets

20170704_123804s.jpg (249.9 KiB) Viewed 6848 times

The top shelf with stain applied.

Color applied

20170704_123506s.jpg (267.88 KiB) Viewed 6848 times

I still have to apply stain to the rest of the galley and counter. Once the stain is applied and dry I will apply 3 coats of floor polyurethane. The usual method of application is White Elmer's Glue diluted 50/50. I could not find gallon sized Elmer's Glue around town so I used TBII. I usually use TBII diluted to 50/50 anyway so I figured why not? Worked great, now for the long test.....

[depatty]

Looks GREAT!!!

[amandacreiglow]

Oooh pretty! Well done!

[GPW]

Very Nice !!!

[KCStudly]

Had me going there for a second.

Looks really good!

[GPW]

Think how strong all that overlapped paper is … Paper is made from Wood …

[ghcoe]

Think how strong all that overlapped paper is … Paper is made from Wood …

One of the reasons I chose this technique. I tried just paint.... . Granite I did not want to add a lot of weight so I though I would give this a try. Looks great now , but not sure how well it will hold up to expansion/contraction of the foam in weather extremes. This is a test...

[ghcoe]

Well I have been procrastinating the updates. Seems everything is going way too fast now. I get a chance here and there to work on the trailer, but not much time to update the thread.

I stumbled upon a great deal on some cushions. I pass a rv furniture store everyday and on a whim I stopped in to see what they had. Lucky me they just received some odd and ends that they purchase from time to time. I was lucky enough to find a 48" wide x 72" long set in a acceptable color. Just a $190.00 out the door, which was a steal for what I was planning to pay.

Furniture

20170728_130034s.jpg (221.96 KiB) Viewed 6652 times

Fit perfect between the wheel wells. This is the cushions set up as a day couch.

Wheel wells

20170728_155451s.jpg (217.13 KiB) Viewed 6652 times

And laid out as a bed.

Bed

20170728_155603s.jpg (230.07 KiB) Viewed 6652 times

The cushion material is great. Better than what our old travel trailer had.

[ghcoe]

So since I purchased cushions I really did not have a need for the foam floor mats that I purchased at HF. My original intent was to use the mats for a bed, but I wanted to be able to make a couch for the day if needed and they would be a bit awkward for that. So I decided to use them as a floor mat ! Well I guess that is what they were intended for anyway. Looks great and a bit of extra cushion for getting in and out with the cushions set up as a couch.

Floor mats

20170729_093956s.jpg (284.75 KiB) Viewed 6649 times

Oh, forgot to mention that the extra cushion stores up front under the shelves when the couch is made up. This is where the beading will probably also be stored during the day.

Storage

20170728_155514s.jpg (306.04 KiB) Viewed 6649 times

[ghcoe]

Next I got some more of the wiring done. I finished the interior lighting. One light above each window...

Windows

20170805_213337s.jpg (233.07 KiB) Viewed 6700 times

and two lights under the front shelves.

Shelves

20170805_213345s.jpg (237.78 KiB) Viewed 6700 times

Then I finished wiring the clearance lights.

Clearance

20170805_212916s.jpg (109.78 KiB) Viewed 6700 times

[ghcoe]

Then of course the galley needed to be finished as well. I have one more LED to add then it will be finished, but here it is as of now.

Galley lights

20170805_212947s.jpg (116.04 KiB) Viewed 6699 times

In the above shot you can see that I have also been working on a galley organizer for the microwave, plates, bowls and cups. Also, a storage area for the stove during transit.

A mock up of where items would go.

Before

20170804_115825s.jpg (276.26 KiB) Viewed 6699 times

After

20170804_120530s.jpg (315.27 KiB) Viewed 6699 times

[ghcoe]

Now I am ready to start cutting...

Cutouts

20170804_121550s.jpg (368.01 KiB) Viewed 6694 times

Then once all is cut out the test fit.

Cutouts cutout

20170805_101349s.jpg (300.74 KiB) Viewed 6694 times

Another shot with the stove in travel mode. I used some left over floor mats for the shelf face and for the stove location to keep things from shifting around during transit.

Ready for travel

20170813_085637s.jpg (383.57 KiB) Viewed 6694 times

[ghcoe]

Lastly, I mounted the hatch draw latches.....

Draw latch

20170813_080418s.jpg (224.87 KiB) Viewed 6670 times

and bumper mounts.

Bumper mounts

20170813_080508s.jpg (284.54 KiB) Viewed 6670 times

The bumper mounts are actually the stake side mounts included in the HF trailer kit, but I think they will work good as bumper mounts too.

[GPW]