I'm converting a cargo trailer into a camper and am running into an electrical difficulty that I hope some of you guys/gals might know the appropriate solution.
Goal: Install 120 volt receptacle inside 1/2 inch wall...
I only have 1/2 inch between the walls of the trailer to work with and the smallest gang/enclosures I've seen have been 1 inch deep. I did come across 1/2 inch deep round enclosure, except it would only accept wires from the rear and not the sides and the 12-2 romex wouldn't work with it. I know that there is a way for it to work, I am just not aware of the hardware (gang/enclosure) to "get-r-done". Any help would be appreciated.