![Image](http://lavengood.com/tongue/01.jpg)
I had him weld a 2x2 tube into it and then weld 3 sets of angle iron brackets to mount it and I have a tongue to tail reese hitch
![Image](http://lavengood.com/tongue/02.jpg)
62# upgrade
![Image](http://lavengood.com/tongue/03.jpg)
![Image](http://lavengood.com/tongue/04.jpg)
![Image](http://lavengood.com/tongue/05.jpg)
That drill hole is where I bolted the safety chain. I don't know how legal or wise that is but if I welded it, the tube would be stuck in the trailer
![Image](http://lavengood.com/tongue/06.jpg)
I used washers to fill the gap over the bottom steel plate and I hammered a plate of steel over the 2x2 to fill the gaps before bolting it down.
![Image](http://lavengood.com/tongue/07.jpg)
![Image](http://lavengood.com/tongue/08.jpg)
![Image](http://lavengood.com/tongue/09.jpg)
![Image](http://lavengood.com/tongue/10.jpg)
The trailer rides so smooth now that I cant feel it back there