lawdog49 wrote:What's the weight on your trailer?
NotJammer wrote:Please let us know when and how you anchor to the slab. I live in a tornado area. The weird thing here is I need a permit to tie anything down but don't if it just sits there. Even my 'portable' building which is 16 X 40 only needs permits if tied down. Odd
I park on my patio. The trailer has messed the bed...
flboy wrote:NotJammer wrote:Please let us know when and how you anchor to the slab. I live in a tornado area. The weird thing here is I need a permit to tie anything down but don't if it just sits there. Even my 'portable' building which is 16 X 40 only needs permits if tied down. Odd
I park on my patio. The trailer has messed the bed...
Will do. I have not decided on a method yet, but it will likely involve eye bolts being screwed in anchors flush with the pad and then some cables to the frame or axles to tighten with turnbuckles.
hankaye wrote:flboy, Howdy;
To bad you already have the slab built. Have you ever seen the padeyes that are used for aircraft tie-downs?
https://www.google.com/imgres?imgurl=ht ... kQ9QEILTAA
A few sections of 3/8" or thicker re-bar crossed or just 1 bent section placed in a recess in the cement slab
and located under where the corners would end up then criss-cross your tie-down straps that's how I'd have
gone about it.
hank
Tommy B wrote:Make sure your KTM is insured for liability. Luckily We did. That guy tried to say it was my fault but he had no insurance. My company Allstate did investigate and thankfully sent me a letter stating that I was not at fault after investigating his claim. Can you believe that! Had I not been alert and cautious he may well have been a paraplegic breathing through a tube in his throat and my hand would most certainly have been severed completely. But he thought he could blame me rather than be great full at how things actually went down. Don't trust anybody when it comes to accidents it seems. Don't even reach out to them. It may come back to bite you.
Return to Cargo Trailer Conversions
Users browsing this forum: Bing [Bot] and 1 guest