First build begun down under

[k1w1campa]

I christen thee “Kiwi campa “

Things are a little slow at the moment thumb got in the way


Sent from my iPhone using Tapatalk

[Staryder61]

on the Kiwi Campa, I like it.. love the little cut outs..
Hoping the thumb's not to bad. Unfortunately it does and can happen. Still have all my digits, though one a little flatter on the end..

k1w1campa wrote:
I’m putting a caravan vent in the roof and I’ve repurposed some cpu fans to provide air circulation within the cabin drawing air from outside.
Sent from my iPhone using Tapatalk

k1, what about other vents besides the caravan vent? In case you have to close it. Do you have any others in place or going to add any?

[k1w1campa]

I have a couple of small cpu fans circulating air drawn from the hatch area which is not as airtight as the cabin



Sent from my iPhone using Tapatalk

[DaddyJeep]

:thumbsup: on the Kiwi Campa, I like it.. love the little cut outs..
Hoping the thumb's not to bad. Unfortunately it does and can happen. Still have all my digits, though one a little flatter on the end..

I can't help but wonder if the thumbs up smiley guy is supposed to be funny or not.

[Staryder61]

= means great job, pat on the back, and with the last pic post, a little fun too...

[k1w1campa]

The colour scheme




Sent from my iPhone using Tapatalk

[Staryder61]

The paint scheme turned out really nice.

[k1w1campa]

Three coats of light oak polyurethane on the sides


Sealing up the door jams

Undercoating the inside of the hatch




Sent from my iPhone using Tapatalk

[Staryder61]

Looking very good and still moving right along,
How's that thumb doing? Doesn't look like it's slowing you down much..

[k1w1campa]

No it’s ok for painting but not much else but it’s getting there


Sent from my iPhone using Tapatalk

[k1w1campa]

I’ve finally sorted fenders. Couldn’t find the ones I wanted at a reasonable price so I made my own, now they just need staining




Sent from my iPhone using Tapatalk

[OP827]

Wooden fenders are looking great and original

[swoody126]

a note of caution about bending the ply into that close of a radius

due to the way plywood is cut from the log it WILL begin checking if it isn't heavily stabilized/saturated with straight unthickened epoxy resin

if you intend to stain the wood to match the rest of the trailer check with the epoxy manufacturer and make darn sure the stain is compatible with their product line

just this old man's 2¢ worth

sw

[k1w1campa]

If they do cause me any grief in the future I'll just lay a layer of dinyl cloth and resin over the top.

[k1w1campa]

Busy day today


Sent from my iPhone using Tapatalk