Rainier70 wrote:We put an older style used "slam lock" on the door. We decided to not use an RV lock because of how much support material is removed from the door to accommodate the inset latch. The cargo trailer doors are thinner than RV doors, so the main door support can be just about cut in two when putting the RV style latch in unless you reinforce it.
The latch we used only entailed putting a one inch hole through the door. It holds the door nice and tight. I do have the keys for it, but since I still use my cargo bar, they are not a real necessity when locking up from the outside.
onehoser wrote:
any more details of the latch you installed? i was going to install an rv latch but i'm thinking twice
Rainier70 wrote:onehoser wrote:
any more details of the latch you installed? i was going to install an rv latch but i'm thinking twice
The secondhand doorlock that I used, I got from a generous member of this forum, but they can be bought by looking up teardrop trailer parts. Here is a link to one supplier:
https://www.teardroptrailerparts.com/do ... -kits.html And from their pictures you can see the parts and basically how they work. Mine locks on the inside with a lever and outside with a key.
Return to Cargo Trailer Conversions
Users browsing this forum: Bing [Bot] and 7 guests