What did you do today

General Discussion about almost anything Teardrop or camping related

Re: What did you do today

Postby Tom&Shelly » Sat Feb 29, 2020 11:36 am

BigDave_185 wrote:Tom when you say prices jumped up, what kind of cost would it be to fill up a ballon that larger? How many gas bottles?
They do a ballon fest here in ogden Utah every year and it’s such a fun experience to take kids to, the color and sure size is amazing. We all appreciate the hobby from a far. Thanks


Sent from my iPhone using Tapatalk


Hi Dave,

It costs somewhere above $1000 a flight for hydrogen. Over $10,000 per flight for helium when everyone stopped doing it. The way to get into this hobby, IMO, is not to own a balloon, but to help friends who own balloons! Shelly and I did take one flight in the hydrogen balloon, our one and only due to our engineer/school teacher budget, and a once in a lifetime experience.

But the colorful balloons use propane and fly on hot air. This is our friends':

161224

That is what you'll see at balloon rallies, and it's a totally different sport. There are many hot air balloon pilots, especially out here in the west. They usually fly for an hour or two in the mornings, and that only costs maybe 15 gallons of propane. (The same fuel many of us use to "fly" our houses; there is no difference in "grade" like there is between automotive and aviation gasoline.) We haven't been to the Ogden balloon fest, but we usually go to three or four rallies a year. (One reason Shelly and I want a teardrop.)

Tom
174145 170466 173366
Tom&Shelly
Palladium Donating Member
 
Posts: 2349
Images: 2170
Joined: Tue Sep 05, 2017 3:27 pm
Location: New Mexico

Re: What did you do today

Postby twisted lines » Sat Feb 29, 2020 6:37 pm

So far they are all great :beer:
Here is mine, worked on the city bumper skirts (again today) Now I am coming down to one that's been hanging over my head,
How to shorten the latch on the ammo can, between the tire / can for my battery, in this position.
Nothing is moving but the lathes / lid.
Attachments
Latch.jpg
Latch.jpg (76.69 KiB) Viewed 6071 times
Racking up; And Rapin foam
User avatar
twisted lines
1000 Club
1000 Club
 
Posts: 1243
Images: 2
Joined: Wed Oct 10, 2018 4:37 am
Location: Jefferson

Re: What did you do today

Postby BigDave_185 » Sat Feb 29, 2020 8:21 pm

Can you simply turn the can around so the latch is on the wheel well side?


Sent from my iPhone using Tapatalk
User avatar
BigDave_185
The 300 Club
 
Posts: 455
Joined: Mon Oct 23, 2017 4:42 pm
Top

Re: What did you do today

Postby BigDave_185 » Sat Feb 29, 2020 11:04 pm

The projects of today

Epoxy second trailer ImageImage

Purchase completely in needed garden tractor
Image 1977 era I believe

Fix or reinstall all Honda xr parts and give it the ol slap n tickle to see if she starts

Image
It runs but 1/4-100% throttle Boggs out. Lack of fuel I assume. More tomorrow on her I assume


Sent from my iPhone using Tapatalk
User avatar
BigDave_185
The 300 Club
 
Posts: 455
Joined: Mon Oct 23, 2017 4:42 pm
Top

Re: What did you do today

Postby twisted lines » Sun Mar 01, 2020 8:56 am

BigDave_185 wrote:Can you simply turn the can around so the latch is on the wheel well side?


Sent from my iPhone using Tapatalk


No both end are the same.
Racking up; And Rapin foam
User avatar
twisted lines
1000 Club
1000 Club
 
Posts: 1243
Images: 2
Joined: Wed Oct 10, 2018 4:37 am
Location: Jefferson
Top

Re: What did you do today

Postby BigDave_185 » Sun Mar 01, 2020 9:16 am

So your saying the kid comes off completely? Does it have to? Just have the once side act as a hinge.


Sent from my iPhone using Tapatalk
User avatar
BigDave_185
The 300 Club
 
Posts: 455
Joined: Mon Oct 23, 2017 4:42 pm
Top

Re: What did you do today

Postby twisted lines » Mon Mar 02, 2020 12:20 pm

BigDave_185 wrote:So your saying the kid comes off completely? Does it have to? Just have the once side act as a hinge.


Sent from my iPhone using Tapatalk

No it wont open at this point.

I guess I need to buy another box or quit being so sentimental about this box and cut the handle shorter, but that will also be intwo :NC
Attachments
Stuck.jpg
Stuck.jpg (49.17 KiB) Viewed 6004 times
Racking up; And Rapin foam
User avatar
twisted lines
1000 Club
1000 Club
 
Posts: 1243
Images: 2
Joined: Wed Oct 10, 2018 4:37 am
Location: Jefferson
Top

Re: What did you do today

Postby Tom&Shelly » Wed Mar 04, 2020 6:57 pm

After the high last week from replacing our kitchen under-counter florescent lights with LED lights, I decided to look into replacing the 52 T-12 tubes in our workshop with LEDs.

First of all, I wasn't aware of this, but I should have been buying T-8 tubes (1 inch diameter) for the past few years, instead of the 1.5 inch T-12s. At 32 watts, the T-8s actually put out as much light as the (older technology) T-12s. Evidently, not only am I losing money, but I'm an ENEMY OF THE ENVIRONMENT! :o Guess they outlawed T-12s back in 2015 (or something), but Home Depot is allowed to sell them until their stock is gone, and they still had some for sale last week.

Anyway, I'm a retired engineer and decided to figure out what the florescent lights cost me. If I run them for 8 hours a day, at 10 cents a kilowatt-hour, I pay $584/year! :shock: Okay, that has my attention! If I replace each tube with an 18 watt LED replacement, I will save $321/year (now that I'm retired and planning to spend at least 8 hours a day in the shop.)

Next thing to know is that there are two kinds of LED replacements. The first kind runs directly off of house current, and requires replacing the ballast in the fixture. Not a problem as far as I'm concerned, but the cheapest I can find these is at about $5.12/unit. With 52 units, not chump change--though I should make it up in less than a year.

Then, I was at Walmart yesterday, and found these suckers at only $4.40 a unit! No ballast replacement, they just plug right in! So I bought a pair to test...

161250

They looked great this morning, but when I came back down after a break, here's what we had:

161249

Shelly looked at the reviews, and with 2.5 stars, this was evidently not an uncommon problem. I fixed their packaging for them, and so they can resell the one that still works after I return them.

161251

So, I did order some of the ballast replacement type from Amazon, and will test those out. They all get something like 4.5 stars, out of several hundred reviews, and some of the one stars are bogus. So we'll hope for the best, and return the rest!

And yes, I am looking forward to taking out the ballast's from 26 light fixtures! They fail as well as the tubes. And as an engineer, I'm wondering what I can do with them. Also, as an engineer, I'm half thinking of cutting the failed Walmart tube apart to see why it failed, instead of getting my $8.80 back. (I'd be more eager if I didn't have a teardrop to finish!)

Tom
174145 170466 173366
Tom&Shelly
Palladium Donating Member
 
Posts: 2349
Images: 2170
Joined: Tue Sep 05, 2017 3:27 pm
Location: New Mexico
Top

Re: What did you do today

Postby BigDave_185 » Fri Mar 13, 2020 7:26 pm

Today we finished up a massive table for a nook that was in one of our custom homes

Image

Also installed some awesome looking floating shelves for one of the other houses closed in December
Image

Image
And finished up this nice little coat rack for another house.

Today was a catch up day for the cabinet shop. Trying to keep busy while our other stuff gets delivered hopefully before the state shuts down


Sent from my iPhone using Tapatalk
User avatar
BigDave_185
The 300 Club
 
Posts: 455
Joined: Mon Oct 23, 2017 4:42 pm
Top

Re: What did you do today

Postby Modstock » Fri Mar 13, 2020 10:05 pm

Tom&shelly ;;;;

Look into the harbor freight lights. I just picked up a 4 footer a few months ago and am so far impressed.
Thier reviews are way better than wallyworlds.

Sent from my H1611 using Tapatalk
User avatar
Modstock
1000 Club
1000 Club
 
Posts: 1113
Joined: Wed Feb 01, 2012 1:18 am
Location: Salt lake , Utah
Top

Re: What did you do today

Postby noseoil » Sun Mar 15, 2020 8:02 am

Going to set up a small milling machine for simple stuff in the shop. Worked on a rolling table stand for the bench-top model I'm getting this week (PM-25MV). Since this picture was taken, I added a center support rail & 14 gauge top with obligatory black paint to get it ready. The mill weighs in at about 275#.

I'm not a machinist, but doing tooling in wood stuff over the years should help with cutting techniques. Heck, it's just a big router with better feeds & easier setups than making jigs by hand for repetitive cuts in wood. The first thing I'm building is a magnetic chuck for my 2" blade grinder, to remove scale & flatten knife material with better precision. Will post a new picture once it's set up & running, but this shows the basic framework without the center support rail. It's 1 1/2" 16 gauge square tubing mostly. Had a bunch of left-over casters from Costco's steel shelving we use in the basement & shop for storage racks.

161334
Build log: viewtopic.php?f=50&t=60248
The time you spend planning is more important than the time you spend building.........

137905
User avatar
noseoil
1000 Club
1000 Club
 
Posts: 1821
Images: 669
Joined: Sun Apr 27, 2014 8:46 am
Location: Raton, New Mexico, living the good life!
Top

Re: What did you do today

Postby BigDave_185 » Sun Mar 15, 2020 9:35 am

Looks good, where did you source your mill?


Sent from my iPhone using Tapatalk
User avatar
BigDave_185
The 300 Club
 
Posts: 455
Joined: Mon Oct 23, 2017 4:42 pm
Top

Re: What did you do today

Postby twisted lines » Sun Mar 15, 2020 11:50 am

Found a Fat fifty would Fit 3 12V AGM's I had from a 36V E bike, Cheap way out :thumbsup:
Then while shopping for the can I found the portable battery kit, video's, and parts list
3 cans 4 more battery's, switches, gauge's, Anderson powerpoles, crimping tool, & Locks for the cans.
I think I have a way to power, a trolling motor for a boat I don't have.
Attachments
Fat 50.jpg
Fat 50.jpg (60.47 KiB) Viewed 5719 times
Last edited by twisted lines on Tue Mar 17, 2020 11:35 am, edited 1 time in total.
Racking up; And Rapin foam
User avatar
twisted lines
1000 Club
1000 Club
 
Posts: 1243
Images: 2
Joined: Wed Oct 10, 2018 4:37 am
Location: Jefferson
Top

Re: What did you do today

Postby PCO6 » Sun Mar 15, 2020 6:54 pm

I built a radio, switch and charge centre for my trailer to get a lot of what I need in one spot. I still need to trim out the edges of the wood but that's pretty straight forward.

Image
User avatar
PCO6
Teardrop Master
 
Posts: 133
Images: 3
Joined: Mon Jan 19, 2015 5:08 pm
Location: Newmarket, Ontario
Top

Re: What did you do today

Postby Tom&Shelly » Tue Mar 17, 2020 5:29 pm

Modstock wrote:Tom&shelly ;;;;

Look into the harbor freight lights. I just picked up a 4 footer a few months ago and am so far impressed.
Thier reviews are way better than wallyworlds.

Sent from my H1611 using Tapatalk


I looked at those, and might try them when I need more light in the shop. But Harbor Fright doesn't post the spec's, including how much current they draw. I've already "invested" in 26 dual 40 W florescent fixtures, and certainly wouldn't want to replace them with the light equivalent of single tube fixtures.

Instead, I bought 50 LED replacement tubes. In this case, they are dual end, no ballast types, which means I had to rewire every fixture to remove the ballast and apply 120 VAC across each tube. I did the first six in such a way that I could go back if the tubes displayed infant mortality, or I didn't like them for any other reason (required wire nutting five 18 gauge wires together). Tried them for a day or so, and decided to proceed and wire the rest, daisy chaining to make the wire nutting easier (one can insert two pairs of wires into each tomb stone holder to daisy chain them together). Would be a bear to re-install the ballast that way, however.

So after three days or so, I have all but one fixture converted. At $5 + change per 22 W tube, I should recoup the savings after less than a year.


161366 161370

The bright looking fixture in the pictures is the florescent. It actually doesn't put as much light on the ground.

As far as quality of light, I'll give it 4 stars. I used 22 W replacements instead of 18 W, so I should actually be getting more light. However, I do notice white/yellow banding, particularly on objects close to the lights, such as the teardrop roof. However, I spent today making some wood parts for the teardrop, and didn't notice any problems while concentrating on the job at hand.

One curious thing: here is the reflection off of our miter saw:

161372 161371

The first image is focused on the surface while I believe the other is focused on the light causing the reflection (that's what my eyes adjust to). First, notice the gaps between individual LED's are apparent. Then, also notice the saw's surface acts like a prism, breaking the light into its component colors. Much better than florescent, which (at least for the tubes I use) have several bright lines, rather than a continuum.

So that's what I did over the weekend. Now, I have to figure out what to do with 50 T-12 florescent tubes, and 25 ballasts. Took one of the (electronic) ballasts apart, and found some good parts for an electronics scrounge like me. Shelly saw potential doll house parts.

Tom
174145 170466 173366
Tom&Shelly
Palladium Donating Member
 
Posts: 2349
Images: 2170
Joined: Tue Sep 05, 2017 3:27 pm
Location: New Mexico
Top

PreviousNext

Return to General Discussion

Who is online

Users browsing this forum: No registered users and 4 guests