After the teardop is done...

Things that don't fit anywhere else...
Post a reply

After the teardop is done...

Postby Arne » Sat Jul 22, 2006 3:20 pm

we build things like this...

http://tinyurl.com/qskdu

http://tinyurl.com/p8o6m

http://tinyurl.com/fafqj
www.freewebs.com/aero-1
---
.
I hope I never get too old to play (Arne, Sept 11, 2010)
.
User avatar
Arne
Mr. Subject Line
 
Posts: 5383
Images: 96
Joined: Fri Aug 13, 2004 12:25 pm
Location: Middletown, CT
Top

Postby rampage » Sat Jul 22, 2006 4:43 pm

Where can you find plans to build one of those?
"If you can't be a good example, then you'll just have to be a horrible warning"
User avatar
rampage
Donating Member
 
Posts: 286
Images: 5
Joined: Tue Jan 24, 2006 12:02 pm
Location: Florida
Top

Postby asianflava » Sat Jul 22, 2006 7:23 pm

What, no smokey burnout?

That's cool.
User avatar
asianflava
8000 Club
8000 Club
 
Posts: 8412
Images: 45
Joined: Mon Aug 02, 2004 5:11 am
Location: CO, Longmont
Top

Postby Arne » Sat Jul 22, 2006 7:31 pm

It is a one-off using a 2 cylinder 16 h.p. b&s engine and a comet cvt clutch.... all the components determined the length.. top speed is about 55 mph.

We are also working on a trebuchet and a soft-ball launching air cannon. Not sure if we will make it to the punkin-chunkin or not.

http://www.punkinchunkin.com/

See, one time I was told I was stupid on the forum... I thought I'd post the videos showing that even stupid people can do interesting things.
www.freewebs.com/aero-1
---
.
I hope I never get too old to play (Arne, Sept 11, 2010)
.
User avatar
Arne
Mr. Subject Line
 
Posts: 5383
Images: 96
Joined: Fri Aug 13, 2004 12:25 pm
Location: Middletown, CT
Top

Postby asianflava » Sat Jul 22, 2006 7:49 pm

heh heh heh I have a folder of trebuchet plans saved to my desktop.
User avatar
asianflava
8000 Club
8000 Club
 
Posts: 8412
Images: 45
Joined: Mon Aug 02, 2004 5:11 am
Location: CO, Longmont
Top

Postby nubwon » Sat Jul 22, 2006 8:37 pm

Great looking scooter Arne!!! :thumbsup: :thumbsup: I have an 18 horse on mine, but I have it geared to about 45mph. Kinda skeered to go faster than that on such a small thing lol.
If your gonna be dumb, you gotta be tuff...
User avatar
nubwon
Teardrop Master
 
Posts: 178
Joined: Fri Oct 22, 2004 6:45 pm
Location: Louisiana
Top

Postby Chip » Sat Jul 22, 2006 8:41 pm

arne,,,, I WANT ONE OF THOSE!!!!!!!!,,PLANS, SPECS, SKETCHES, ETC ETC,,,

read my lips I WANT ONE !!!!!!!!!!!!!!!!

CHIPPER :thumbsup: :thumbsup:
Living large,,,travling small !!!
54"x9'4" tear
4'x8' tear
Serro Scotty rebuild(in progress)
User avatar
Chip
2000 Club
2000 Club
 
Posts: 2534
Images: 49
Joined: Sat Apr 17, 2004 7:33 pm
Location: Greenville, S.C.
Top

Postby Arne » Sat Jul 22, 2006 9:12 pm

I have some construction still photos I can post tomorrow... but there are no plans. I was all done from scratch with existing parts, except for the cvt....

The fork, triple tree, frame, etc., were all home built.
www.freewebs.com/aero-1
---
.
I hope I never get too old to play (Arne, Sept 11, 2010)
.
User avatar
Arne
Mr. Subject Line
 
Posts: 5383
Images: 96
Joined: Fri Aug 13, 2004 12:25 pm
Location: Middletown, CT
Top

Postby madjack » Sat Jul 22, 2006 9:20 pm

Chip, I googled "mini chopper" and it came back with all kinds of info on parts/plans/ect..check it out.............. 8)
...I have come to believe that, conflict resolution, through violence, is never acceptable.....................mj
User avatar
madjack
Site Admin
 
Posts: 15128
Images: 177
Joined: Thu Dec 02, 2004 5:27 pm
Location: Central Louisiana
Top

Postby Chip » Sat Jul 22, 2006 9:55 pm

thanks Mad,,,,,,,,,,,,,,,,,,, :thumbsup:
Living large,,,travling small !!!
54"x9'4" tear
4'x8' tear
Serro Scotty rebuild(in progress)
User avatar
Chip
2000 Club
2000 Club
 
Posts: 2534
Images: 49
Joined: Sat Apr 17, 2004 7:33 pm
Location: Greenville, S.C.
Top

Postby Nitetimes » Sat Jul 22, 2006 10:26 pm

Arne wrote:See, one time I was told I was stupid on the forum... I thought I'd post the videos showing that even stupid people can do interesting things.


Musta missed that or was it a perceived thing? Who actually built the bike? It looks pretty cool, sounds good too. But I think I would keep it off of the road before somebody gets hurt, you'd get arrested around here for ridin' that on the road.
Rich


Image
ImageImage
-
The strongest reason for the people to retain the right to
keep and bear arms is, as a last resort, to protect themselves
against tyranny in government.
- Thomas Jefferson -
Personally, I carry a gun because I'm too young to die and too old to take a butt kickin'.
User avatar
Nitetimes
7000 Club
7000 Club
 
Posts: 7909
Images: 194
Joined: Sat Feb 12, 2005 12:44 am
Location: Butler,PA
Top

Postby Arne » Sun Jul 23, 2006 10:44 am

The frame is bits and pieces of square and round tubing... some of the triple tree was cut on a Bridgeport. The front end headset rake was determined by looking at my motorscooter... as mentioned, no plans... just a project I'd been thinking about since I got the rear tire off a junked sno-cat machine at a local ski area 5-6 years ago.... finally got some time.

I'll be starting my second tear in September after it starts to cool off. This was just squeezed in during the cool morning hours. The paint was by 'a friend'...

I've put out some pics on this site:

http://www.freewebs.com/scooter-build-1/
www.freewebs.com/aero-1
---
.
I hope I never get too old to play (Arne, Sept 11, 2010)
.
User avatar
Arne
Mr. Subject Line
 
Posts: 5383
Images: 96
Joined: Fri Aug 13, 2004 12:25 pm
Location: Middletown, CT
Top

Postby Chris C » Sun Jul 23, 2006 1:46 pm

Cool toy, for sure. 8) :applause:
Chris :D

The tension between what is good enough and what is beyond that creates the space for character to become our work.

Teardrop Trailer Build Pictures: http://tinyurl.com/px5cd
Chris C
.
 
Posts: 3302
Joined: Sun May 15, 2005 7:24 pm
Location: Norman, Oklahoma
Top
Post a reply

Return to Off Topic

Who is online

Users browsing this forum: No registered users and 0 guests

Custom Development by Motivo Solutions | Powered by phpBB® Forum Software © phpBB Group