Help to idenify the connecter..

[RJ Howell]

Having an issue figuring this one out and hoping someone knows it..

I need a few of the other side (male end) to make this work out.. You know it?

[Florida Native]

Not positive, but it looks a lot like an EC5 connector. Like what you'd see on a tiny portable jump starter pack.

-Mike

Sent from my SM-G950U using Tapatalk

[RJ Howell]

I'll check that as well. Another said it could be a XT-60..

Thank you for the response.

[MtnDon]

That appears to be an XT60 connector. What is the number molded into the side. I can't make it out clearly in the photo.

like this

usually available only as a M/F pair

[RJ Howell]

Checked both and it does look like it's an XT-60.

Again, thank you for th assistance!

[Tom&Shelly]

Checked both and it does look like it's an XT-60.

Again, thank you for th assistance!

Yes, I use them on my build

https://www.amazon.com/Finware-Female-Bullet-Connectors-Battery/dp/B01ETROGP4/ref=pd_bxgy_2/145-3426578-5836363?_encoding=UTF8&pd_rd_i=B01ETROGP4&pd_rd_r=8f059e94-5552-49d0-a25f-d5b70b957000&pd_rd_w=oNv93&pd_rd_wg=oezn7&pf_rd_p=4e3f7fc3-00c8-46a6-a4db-8457e6319578&pf_rd_r=QBHR8C1QTV43S1SWQE2K&psc=1&refRID=QBHR8C1QTV43S1SWQE2K

There is also a smaller version, called the XT-30, good for tight places, and lower current

https://www.amazon.com/Finware-Upgrade-Female-Connectors-Battery/dp/B074S7NH3H/ref=pd_bxgy_3/145-3426578-5836363?_encoding=UTF8&pd_rd_i=B074S7NH3H&pd_rd_r=17e7864a-ecfc-40f6-b313-93c9c07ec2ca&pd_rd_w=1FPAg&pd_rd_wg=66JCj&pf_rd_p=4e3f7fc3-00c8-46a6-a4db-8457e6319578&pf_rd_r=9YP99Z1A54GX7AAMEPWR&psc=1&refRID=9YP99Z1A54GX7AAMEPWR

Tom

[RJ Howell]

That appears to be an XT60 connector. What is the number molded into the side. I can't make it out clearly in the photo.

like this

usually available only as a M/F pair

I laughed when you said that.. I hadn't noticed... It's marked XT-60

[John61CT]

XT-90 big brother, those are amps ratings.

Good connectors, but soldered.

I prefer Andersons