OK it has been a while since I have posted. I have made some progress and went bouncing around Colorado for a few days. Before I left for Colorado, I did manage to get the inside skin on each of the skeletons. Here is the first middle interior piece going on.
the water filled buckets were a good idea for additional weight. Unfortunately, even half full, when you hit something lifting them, they still spill. I got it cleaned up, added the other pieces and trimmed one while the glue dried on the second skeleton
When I returned from Colorado, I trimmed the second one and added the foam insulation to the voids.
The first section of exterior skin has been cut for both sides. I need to put the stop blocks on the skin so I can glue the skin on to the skeleton reasonably aligned. The glue up will be an early morning activity this weekend. The temperature has been in the 107 degree range the last few days. Hopefully, the temperature will drop down a little more than the 100s they are calling for now. Either way, getting out early while it is still relatively cool, will hopefully give me a little more work time with the glue.