I received the new trailer a few weeks ago. As I said, I ordered it with a white aluminum interior and all insulation installed. It also has shore power installed, along with a Fantastic remote control fan. I spent more for this trailer, but when I compared my cost of materials to do the windows, insulation, interior finish, shore power, and LED lights it was "close enough"to go ahead and have the factory do the installation. Total price was right at $4,000. The trailer is a "Road Force"so the exterior and most of the interior uses glue, rather than screws, and it was all trimmed out.
The first modification was a two inch lift. I bought the brackets for a spring-over and did the lift in a few hours of welding and grinding.
I put a solid vinyl flooring. Blue grey colored "nickle" pattern ordered from Garageflooring.com. I used Roberts floor glue and cut the floor to fit. The trailer came with OSB waterproof flooring and had trim strip all around the edges of the wall, so I just pulled the trim strips of, cut the vinyl to fit, glued the floor down, let it dry, then put the trim back on. I will put some pics on here of the trailer as soon as I get my member profile fixed. Hopefully soon!
Stay tuned!
Gil