34.5" from rear bumper for a 4x8' teardrop; then add 6" for each additional foot of lenght after the 8'.
bartek wrote:When I was doing my axle placement research I found this rule of thumb in this thread: viewtopic.php?f=21&t=420&start=1534.5" from rear bumper for a 4x8' teardrop; then add 6" for each additional foot of lenght after the 8'.
Now, in my case this was 46.5 inches from the back. I did all the math in the world, calculated weights of all the components, added up momentums, came up with 44 inches from the back.
Now when built, it turns out the trailer is front heavy and I had to move battery to the galley to help things a little:) Should have gone with 46.5"
QueticoBill wrote:I hope you never have to defend your registration which I assume is based on the HF kit. Looks like a great custom home built frame.
Users browsing this forum: No registered users and 12 guests