New Build - 6*12 Offroad Toy Hauler

[Staryder61]

Yes Don, please do a thread for it. I'd be interested in it..

[BigDave_185]

Please post a link to new thread for ease of finding it


Sent from my iPhone using Tapatalk

[flboy]

Will do when I set it up.

Upgraded the headlight to LED. Uses less power and 3x to 4x brighter. Will help offroad at night for sure.


Sent from my SM-N970U using Tapatalk

[flboy]

I started a thread on the General Topics Forum for my TAT trip for anyone who cares. I will post some trip updateds there. I start the trip July 1.

https://r.tapatalk.com/shareLink/topic? ... source=app

Sent from my SM-N970U using Tapatalk

[Staryder61]

I started a thread on the General Topics Forum for my TAT trip for anyone who cares. I will post some trip updateds there. I start the trip July 1.

https://r.tapatalk.com/shareLink/topic? ... source=app

Sent from my SM-N970U using Tapatalk

Thank you DON, will be keeping watch..

[flboy]

Getting ready for a 4 night camping trip to Ocala NF next week. Pulled the CTC into the driveway and decided to add the Freshwater tank sensor to the holding tank and the gage to the panel. Works great. The dial goes on and off with the pump switch above it.






I had to stand off the gage about a half inch as the rod was just a little too long and I realized this after I had installed everything but the sensor which I thought I ordered to the correct size. In any case, this worked just fine and did not affect the linearity so it appears.

I sealed the wood so water will not affect it if splashed and I made a compression gasket with some mat foam. Should work fine. The tank is not under pressure.. just want to prevent any leaking due to water being sloshed around.



I added a similar gage to the graywater tank last season.







Sent from my SM-N970U using Tapatalk

[hankaye]

flboy, Howdy;

Good to see ya posting. Almost thought ya'd dropped off the face of the earth.
Still cuttin' holes, and addin' electrical do-thingys. Chucklin'. Reckon Ian didn't
effect ya'll to much. Which is a good thing.

hank

[flboy]

flboy, Howdy;

Good to see ya posting. Almost thought ya'd dropped off the face of the earth.
Still cuttin' holes, and addin' electrical do-thingys. Chucklin'. Reckon Ian didn't
effect ya'll to much. Which is a good thing.

hank

Thanks Hank. Still breathing. Lol

Ian came by here , but was weakened significantly. We even missed most of the rain because we were on the Eastern side when it passed by. Very fortunate for me.

Hope all is well with you.

Sent from my SM-N970U using Tapatalk

[hankaye]

flboy, Howdy;

Yup, still just sittin' here like Snoopy doin' his vulture thing.

hank

[flboy]

All loaded for 4 days of fun in Ocala NF.





Sent from my SM-N970U using Tapatalk

[flboy]

Had an awesome camping trip in Ocala National Forest. Weather was good and got in alot of riding.

Going to do it again in a few weeks! Really enjoying the CTC. Not much else I can think of that I need to do to it.



Sent from my SM-N970U using Tapatalk

[Vnose]

[quote=" You can start to see how it will work. I just need to seal off the backend and the AC will have a closed condenser loop pulling from outside and sending back outside.



Sent from my SM-N970U using Tapatalk[/quote]

Sorry, I'm behind in your build. Very nice job, it's going to be nice.

I may have missed it, but how does the condensation from the A/C drain out?

And, how does the air intake to the left side of the unit draw air from the side vent in the wall to the right of the unit?

Thanks, I like the idea of a hidden window unit.

[flboy]

[quote=" You can start to see how it will work. I just need to seal off the backend and the AC will have a closed condenser loop pulling from outside and sending back outside.



Sent from my SM-N970U using Tapatalk

Sorry, I'm behind in your build. Very nice job, it's going to be nice.

I may have missed it, but how does the condensation from the A/C drain out?

And, how does the air intake to the left side of the unit draw air from the side vent in the wall to the right of the unit?

Thanks, I like the idea of a hidden window unit.[/quote]Hi. The condensation drips through a small vinyl tube I connected to the drain pan. The tube exits through the floor in the appliance stack.

As for the airflow on intake and exhaust, I used 3/4 inch polystyrene foam board along with aluminum duct tape and isolated the intake (sides) from the exhaust (back end). The air is drawn through the side vent and forced out the back side. For all intentional purposes, the AC thinks it is hanging out a window.

Hope this helps.

Sent from my SM-N970U using Tapatalk

[Vnose]

Yes, I'm waiting too!

[flboy]

Camping trip to ONF next week may be in jeaporardy due to soon to be Hurricane Nicole. May have many trees down there. In any case, all hunkered down for a hurricane again!



Sent from my SM-N970U using Tapatalk