bullchuck1 wrote:I like the looks of it so far. Will use a couple of ideas on my build.
jaws_1972 wrote:Sanding and polyurethaning plywood must be a huge project in itself.
jaws_1972 wrote:The finished wood, light and fan are all looking good. Sanding and polyurethaning plywood must be a huge project in itself. You're post office packages remind me that I might need to add a shutoff at some point in time.
jaws_1972 wrote:The finished wood, light and fan are all looking good. Sanding and polyurethaning plywood must be a huge project in itself. You're post office packages remind me that I might need to add a shutoff at some point in time.
Post by bdosborn » Fri Jun 10, 2022 8:59 am
jaws_1972 wrote:
Sanding and polyurethaning plywood must be a huge project in itself.
I was thinking the same thing - that's a lot of work. It looks great.
Bruce
The only wood we wanted to buy for this project was the ceiling plywood and of course the insulation.. though, the rest of this build if it works out, will be repurposing old wood.. and other things we already have stored.
old cedar and pine privacy fence boards,
2" x 4" pine, several of these,
wood from old oak pallets,
brown vinyl lattice, my wife thought would look good in the door frames, and great for ventilation.
So we'll see how a combination of this and that works together...
Mr. Lahey wrote:So we'll see how a combination of this and that works together...
Got a kick out of this quote.
Have to channel Yogi Berra for this one. We are building the exact same thing. Only different.
I am using the same approach. Trying to purchase little. Tap into my stash of recycled, leftover, and salvaged materials.
Cedar fence pickets. Plywood cutoff scraps, salvaged lumber and so forth. I have no shame when it comes to dumpster diving or curb finds.
Should we share a logo? You could get a tattoo. I'm good with a t-shirt.
Karebru wrote:300?
Sounds like a lot of nice reclaimed lumber and a lot of work!
Trailer's lookin' good. I like that curved ceiling.
Had to look up revolution ply.
Return to Cargo Trailer Conversions
Users browsing this forum: No registered users and 6 guests