doug hodder wrote:I just bolted the deck down on the Rocketear, like an hour ago...did the angle tabs like Jim and 12 3/8 carriage bolts...just don't blow too big of a hole for them in the wood, make the steel hole larger...better off to go a hair smaller and smack them through with a hammer on the wood, then when you tighten them up they will seat...I had to do it this way...the dog refuses to hold the wrench on the top when I tighten...when you're working by yourself, you need to devise the easiest method to accomplish your goal...I've done 3 like this and haven't lost one yet..Doug
Doug... May I suggest finding a girlfriend while your building the tear, to help you with the build... You can always dump her when the tear is finnished.......
Doug
....................... 
