Joe:
A few subjects come to mind after reading your posts :
1) When you decide the type of cabin on top of
your frame, axle positioning can have a bearing:
1a)Axle placement issues:
Placement of axle can effect fender position, tongue weight and door placement.
So before you have the guy tacks down your axle read the top part
of this thread to get some basics down.
http://tnttt.com/viewtopic.php?t=11178
1b) How will you mount your axle if your not using a torsion type?
Above the springs or below the springs?
Some put the axle below the springs to give extra height for rougher
terrain?
2) Hurricane hinge questions?
Asianflava aka "Rocky", spoke of right positioning and cutting of this type
of hinge. Please read the top of this thread to see mistakes and questions
on that subject explained in pictures and experiences aplenty.
http://tnttt.com/viewtopic.php?t=11210
As Rocky suggests this forum is wide open and free flowing with lulls where
there are less people between 3-5 AM EST. Most every other hour there
are more than 10 people on board willing to help or point you in what ever
direction you are having issues with. Ask your question and usually within
an hour there will be replies. Within a day your replies will stack uP like
airplanes coming in to JFK on a holiday weekend.
Joe, Get them fancy tools honed and working fine ... there are
some builders here that also have woodworking skills that will
love to see your attention to detail.
Joe, You know the coin of the realm here is
pictures so questions
accompanied with those clicks will get you faster and better responses.
Good luck and welcome aboard Joe~