Sandwich construction

Anything to do with mechanical, construction etc

Sandwich construction

Postby PaulC » Fri Nov 24, 2006 6:17 pm

We have a new manufacturer down here: http://www.camperette.com.au/

They are using fibreglass sandwich construction. I am not particularly fond of it.
What do others think?

Cheers
Paul :thumbsup:
Time is the only real capital we have. Money you can replace but time you cannot.
User avatar
PaulC
3rd Teardrop Club
 
Posts: 4439
Images: 36
Joined: Mon May 24, 2004 7:27 am
Location: Laura, SouthernFlinders Ranges, South Australia

Postby doug hodder » Fri Nov 24, 2006 7:51 pm

Paul....it's not bad looking, but from the shot of the interior compared the exterior side shot, there is a lot of "skirting" around it for that low look...I'm afraid that I'd have all that nice looking white interior looking pretty grubby , especially in the galley...some larger tires and fenders would also look a bit better, but that's just my opinion...Doug
doug hodder
*Snoop Dougie Doug
 
Posts: 12625
Images: 562
Joined: Tue Dec 14, 2004 11:20 pm

Re: Sandwich construction

Postby Podunkfla » Fri Nov 24, 2006 7:53 pm

PaulC wrote:We have a new manufacturer down here: http://www.camperette.com.au/
They are using fibreglass sandwich construction. I am not particularly fond of it.
What do others think?
Cheers
Paul :thumbsup:

Paul... I have seen it used in building larger boat cabin walls and such and thought it was pretty neat way to do it. They laid the first layer of glass cloth down on a big table with a slick surface sprayed with wax, then laid on the foam core wet on the contact side, then glassed the back. They could make great big panels this way. They were building 32 foot oil rig tenders and fishing boats. Kinda expensive process though, I think.

A few years ago I helped build some rather large beer coolers for a bar and we used that method. These were 4' x 8' open top beer coolers on 4 x 4" legs for icing down a bunch of bottle beer at one time. We used foam insulation board with aluminum on both faces. Just built a big box and laid on about 3 layers of glass fabric and resin. As far as I know they are still going strong 15 years later.

Now, I think, you can buy panels already fiberglassed... Prolly expensive, but sure would be light weight. Nice looking tears they are building even with the bare bones galley.
<B>~ Brick
<I>... I've done so much with so little for so long... Now I can do almost anything with nothing! </I></B>
Image...Lots more pix here!
User avatar
Podunkfla
ol' noodle haid
 
Posts: 2261
Images: 5
Joined: Fri Aug 04, 2006 9:25 pm
Location: North Florida near the Suwannee River
Top

Postby Arne » Fri Nov 24, 2006 8:14 pm

4x8 is tight for 2 people... I know some like it, but most are going to 5x?.... Camp-Inn has discontinued making any 4' wide trailers. All of their models are now 5' wide....
www.freewebs.com/aero-1
---
.
I hope I never get too old to play (Arne, Sept 11, 2010)
.
User avatar
Arne
Mr. Subject Line
 
Posts: 5383
Images: 96
Joined: Fri Aug 13, 2004 12:25 pm
Location: Middletown, CT
Top

Postby Classic Finn » Fri Nov 24, 2006 8:47 pm

Here is a drawing of what Im playin around with ....

Image

Classic Finn
Royal Teardrop Society Scandinavian Bureau Chief of Staff

Image
User avatar
Classic Finn
Midnight Sun Voyager
Midnight Sun Voyager
 
Posts: 17488
Images: 146
Joined: Fri Apr 29, 2005 4:29 am
Location: Country of Finland
Top

Re: Sandwich construction

Postby PaulC » Fri Nov 24, 2006 9:01 pm

PaulC wrote:We have a new manufacturer down here: http://www.camperette.com.au/

They are using fibreglass sandwich construction.

I am not particularly fond of this trailer.
What do others think?

Cheers
Paul :thumbsup:


Sorry all, I meant that I'm not very impressed with the TD they have built.
To bland for my likes
Cheers
Paul :thumbsup:
Time is the only real capital we have. Money you can replace but time you cannot.
User avatar
PaulC
3rd Teardrop Club
 
Posts: 4439
Images: 36
Joined: Mon May 24, 2004 7:27 am
Location: Laura, SouthernFlinders Ranges, South Australia
Top

Postby SteveH » Fri Nov 24, 2006 9:48 pm

It's got the door on the wrong side. :(
SteveH
Calling an illegal alien an "undocumented immigrant"is like calling a drug dealer an "unlicensed pharmacist ".
User avatar
SteveH
2000 Club
2000 Club
 
Posts: 2101
Images: 42
Joined: Mon Nov 01, 2004 8:28 am
Location: Bexar Co, TX
Top

Postby asianflava » Fri Nov 24, 2006 10:13 pm

Over $5800 US for a 4X8? that's kinda expensive. It has a distinct look, maybe due to the skirting, but it's bland inside.
User avatar
asianflava
8000 Club
8000 Club
 
Posts: 8412
Images: 45
Joined: Mon Aug 02, 2004 5:11 am
Location: CO, Longmont
Top

Postby PaulC » Fri Nov 24, 2006 10:39 pm

SteveH wrote:It's got the door on the wrong side. :(


You know we also drive on the wrong side of the road to, Steve :lol:

Cheers
Paul :thumbsup:
Time is the only real capital we have. Money you can replace but time you cannot.
User avatar
PaulC
3rd Teardrop Club
 
Posts: 4439
Images: 36
Joined: Mon May 24, 2004 7:27 am
Location: Laura, SouthernFlinders Ranges, South Australia
Top

Postby doug hodder » Fri Nov 24, 2006 10:46 pm

Steve...I think they have the door installed correctly....It's on the outside!!! :lol: Doug
doug hodder
*Snoop Dougie Doug
 
Posts: 12625
Images: 562
Joined: Tue Dec 14, 2004 11:20 pm
Top

Postby sdtripper2 » Fri Nov 24, 2006 10:57 pm

da Dougster wrote:Steve...I think they have the door installed correctly....It's on the outside!!!


Image

Image swoops in to take a foothold in this threadImage
"A man who is good enough to shed his blood for his country
is good enough to be given a square deal afterwards." -------Theodore Roosevelt

Steve
User avatar
sdtripper2
Search Garoux
 
Posts: 2162
Images: 168
Joined: Mon Oct 10, 2005 1:32 am
Location: California, ... San Diego
Top

Postby PaulC » Fri Nov 24, 2006 11:02 pm

Steve, Some say that sarcasm is the lowest form of wit but I think a lot on this forum take it to a much higher dimension :lol:
Cheers
Paul :thumbsup:
Time is the only real capital we have. Money you can replace but time you cannot.
User avatar
PaulC
3rd Teardrop Club
 
Posts: 4439
Images: 36
Joined: Mon May 24, 2004 7:27 am
Location: Laura, SouthernFlinders Ranges, South Australia
Top

Postby sdtripper2 » Fri Nov 24, 2006 11:44 pm

Paul:Image

I think the zings are fun ... and some need a good zing to get their groove back... Image

Some here > Image

And then there are some here would say Humba>Image and get right to the ImageImageImageImageImageImageImage
"A man who is good enough to shed his blood for his country
is good enough to be given a square deal afterwards." -------Theodore Roosevelt

Steve
User avatar
sdtripper2
Search Garoux
 
Posts: 2162
Images: 168
Joined: Mon Oct 10, 2005 1:32 am
Location: California, ... San Diego
Top

Postby Mary K » Fri Nov 24, 2006 11:56 pm

I like to construct a post Thanksgiving Sandwich, like so,

Bread
Miracle Whip
turkey
stuffing
cranberry sauce
Miracle Whip
Bread

Very Yummy 8) 8) 8)

Mk
Mary K

I don't know half of you half as well as I should like; and I like less than half of you half as well as you deserve. Bilbo Baggins
User avatar
Mary K
6000 Club
6000 Club
 
Posts: 6425
Images: 44
Joined: Wed Aug 02, 2006 3:07 pm
Location: Florida, Pensacola
Top

Postby doug hodder » Sat Nov 25, 2006 12:30 am

Mary....you just started that to stir up some trouble, and I mention that as you used it twice as a condiment....Miracle whip???? Excuse me!!!! Well I guess it does make a for a good fiberglass release agent in a mold....and what a way to ruin a perfectly good sandwich that some poor creature gave it's life up for....Shame on you.... :thumbdown: Mayo forever....Hellmans, better known as Best Foods east of the Rockies.... :lol: Doug
doug hodder
*Snoop Dougie Doug
 
Posts: 12625
Images: 562
Joined: Tue Dec 14, 2004 11:20 pm
Top

Next

Return to Teardrop Construction Tips & Techniques

Who is online

Users browsing this forum: No registered users and 6 guests