by asianflava » Sat Jan 29, 2005 12:30 am
I posted this in another thread but I added the power requirements to this one.
Good News! I found my Air conditioner at Home Depot tonight. It is branded as a Hampton Bay. It is the same exact thing for the same exact price. The chassis is the same, even has the same bumps and screws. The only difference is (other than the brand) is the face plate, the air filter is removed by dropping the front panel down. This may work better since my filter has to slide out vertically.
I went outside and measured it:
17 3/8 W
11 1/4 H
13 1/4 D
The backside (metal shell) is 7 1/2 deep from the edge of the plastic face plate. I did have to remove some metal angles on the bottom because it was perventing it from sitting flat. I think they are supposed to hook to the window frame.
I checked the placard on the side it says, 520W 4.8A at 115V. But isn't power current times voltage? Wouldn't that be more like 552W?