
TRAILER FRAME (5'x10' self built): $748 - total weight was 400#s
Steel: 2" sq. tubing (40'), 2" angle (20'), 3" flat (20'), 3" sq. tubing (10'): $90...and I have most of the flat left over and some of the other too.
2" coupler: $22
15" Auto Rims and Tires: $216
Torflex Axle: $161
Stab. Jacks: $50
Safety Chain: $17
4 Lights: $20
Wire: $12
Fenders: $75
Front Crank/Swing Away jack: $20
Primer: $22... but I only used about 1 qt of the gallon.. but I always buy gallons.... same w/ the paint, hardner and Naptha.
Paint: $23
Hardner: $10
Naptha: $10
FLOOR: $92, weight of about 80#s
3 - 5/8" ply: $54
4 - 2xs: $12
2 - Insulation: $44
TD WALLS: $153; weight of 50#s each
3/8" ply exterior: $48
1/2 framing (resawn 2xs): $20
Insulation: $22
1/8" interior: $63
SPARS: $91
13..1x3x6 Poplar: $71
13..1x3x6 Pine: $20
2...1x3x6 Oak: $25
HATCH: $141
1 sheet of 3/4" 9 layer ply: $free/aircraft shipping crate
2 sheets of 1/8" oak (ext/int): $36
1-1x12x8 Poplar $30
Insulation: $leftover
Hurricane Hinge: $75
ROOF/CEILING: $92
2 - 1/4" ply: $24
4 - 1/8" ply: $24
2 - Insulation: $44
EXTERIOR: $541
Epoxy: $175...however, I'll have 3/4 of the 2nd gallon left, same w/ Hardner and fillers, etc..
Hardner: $120
Fillers: $36
Applicators: $30
Primer: $80 (1 gallon of Interlux Epoxy Primekote)
Paint: $100 (5 qts of Interlux Brightside)
Solvents: $80 (Interlux 333, 2333n, 202)
Applicators: $30 (foam rollers, brush, mixing pots, etc.)
WINDOWS/LATCHES: $380
2- 15x30s: $150
2- 15x18s: $100
6 locks and keys: $130
AC/DC Converter and Charger: $125
Fantastic Vent: $95 (used)
Misc lights, switches, wires, connectors, etc: $75
Glue: $50
Plastic: $30
Tarps: $24
MISC Hardware: $50
TOOLS BOUGHT: $90
HVLP Paint Gun Kit: $60
DA Air Sander: $17
Jitterbug Sander: $13