Aluminum Thickness

[Airspeed]

Thanks guys! I appreciate all the help on what I think is going to be the most challenging part of this build,I have worked with steel panels before
but aluminum is going to be a new experience, I hope mine turns out as well as what I have seen here! ThankYou very much!!! Aaron

[madjack]

Bronze would look good but then trim would be a challenge. You can't anneal anodized trim.

Steve we annealed some clear anodized trim with no problems...it is a bit trickier and you have to use either the soot or heat pencil methods but it will work...don't know about colored anodized though
madjack

[Sonetpro]

Bronze would look good but then trim would be a challenge. You can't anneal anodized trim.

Steve we annealed some clear anodized trim with no problems...it is a bit trickier and you have to use either the soot or heat pencil methods but it will work...don't know about colored anodized though
madjack

I thought about using it but I thought it would craze too much. And it was really expensive.

[asianflava]

I think the colored anodizing would change colors. The head and tuned pipe on my R/C Monster Truck is anodized aluminum after awhile, it kinda turned dull almost faded looking.