Varnish

Anything to do with mechanical, construction etc

Varnish

Postby Signman » Sun Apr 15, 2007 8:35 am

I just finished putting in my inside paneling. I was wondering if I should varnish the backside of the paneling before I put in the insulation. Thanks for your help.

Darrel
Signman
Teardrop Builder
 
Posts: 26
Images: 30
Joined: Tue Jan 30, 2007 5:20 pm
Location: Waterloo, Iowa

Postby madjack » Sun Apr 15, 2007 9:09 am

D, been lotssa debate on whether to seal or not or add a vapor barrier...it is a matter of choice and perception...we seal everything, inside and out just because we like belts and suspenders :D ;)
madjack 8)
...I have come to believe that, conflict resolution, through violence, is never acceptable.....................mj
User avatar
madjack
Site Admin
 
Posts: 15128
Images: 177
Joined: Thu Dec 02, 2004 5:27 pm
Location: Central Louisiana

Postby Signman » Sun Apr 15, 2007 10:30 am

Thanks Jack, I will start sealing. I was hoping that I didn't have to seal it. I'm getting tired of the fumes. It's been so cold around here that I can't open the garage door to let the fumes out.

Thanks,
Darrel
Signman
Teardrop Builder
 
Posts: 26
Images: 30
Joined: Tue Jan 30, 2007 5:20 pm
Location: Waterloo, Iowa
Top

Postby doug hodder » Sun Apr 15, 2007 2:30 pm

You could also try water based outdoor polyurethane....dries quickly, no stink, easy clean up...Doug
doug hodder
*Snoop Dougie Doug
 
Posts: 12625
Images: 562
Joined: Tue Dec 14, 2004 11:20 pm
Top

Postby madjack » Sun Apr 15, 2007 6:54 pm

doug hodder wrote:You could also try water based outdoor polyurethane....dries quickly, no stink, easy clean up...Doug


...that is what we used on all interior spaces...leaves little or no odor...thinned it about 10% with water and sprayed it on
madjack 8)
...I have come to believe that, conflict resolution, through violence, is never acceptable.....................mj
User avatar
madjack
Site Admin
 
Posts: 15128
Images: 177
Joined: Thu Dec 02, 2004 5:27 pm
Location: Central Louisiana
Top


Return to Teardrop Construction Tips & Techniques

Who is online

Users browsing this forum: No registered users and 2 guests