Keith B wrote: I'm going to add is vinyl lettering on them... "No Sit / No Step"
If you weld them you can jump up and down on them.
With your way I think you have a chance to change the height later if you want to.
Teardrops n Tiny Travel Trailersor t n ttt for short (tnttt.com) |
Fenders On :)
by bledsoe3 » Wed Apr 25, 2007 2:56 am
If you weld them you can jump up and down on them.
With your way I think you have a chance to change the height later if you want to.
If you do what you've always done, you'll get what you've always got.
-
bledsoe3 - 3000 Club
- Posts: 3694
- Images: 112
- Joined: Tue Jun 07, 2005 5:55 am
- Location: Oregon, Portland
by Keith B » Wed Apr 25, 2007 8:20 am
Oh, I don't think they're going anywhere, not with 5/8" all-thread...my only reason I dont want anyone "on them" is because there is no attachment at the top curved portion, so that will/would be the weakest area and create a lot of leverage "toward" the bottom attachement points...it wont bend/break the attachments, but it could bend the fender itself. But right now..yes, they are quite solid..no wiggle, etc...thanks for the great idea 
************
Keith
"Work and work and do your best! Paint and putty will do the rest!"
Keith
"Work and work and do your best! Paint and putty will do the rest!"
-
Keith B - Silver Donating Member
- Posts: 550
- Images: 148
- Joined: Mon Jan 29, 2007 3:54 pm
- Location: Wichita, KS