I was thinking of 3mm since my Fiberglass Sheeting is 1.8 mm in thickness but actually does it need to be at that thickness? I do have the 1.5 mm ply sheeting left...
Maybe Paul from Down Under can chime in...

Classic Finn

glassice wrote:can you use hi dent foam underneath. that way you have more insulation for the weight
glassice wrote:I use the brown ins 1 " on are trailers the glass is to stop you from putting your finger through the foam If you can glue the 2 together it supper strong like some jet fighters are made that way .I see you did a great job fixing your fenderwhen we do the round parts cut in to 2" strips lay in and fell in with 2 part foam( it's cheep that way)
glassice wrote:now you should get a pay raise when you are flying and get a hold in the wing you can run out and fix it with out landing
Return to Teardrop Construction Tips & Techniques
Users browsing this forum: No registered users and 5 guests