Any suggestions would be great.
Teardrops n Tiny Travel Trailersor t n ttt for short (tnttt.com) |
Does anybody make a round porthole window?
7 posts
• Page 1 of 1
Does anybody make a round porthole window?
by Forrest Ebbs » Mon Jun 28, 2004 5:41 pm
I am looking for round windows with stainless trim. I will be building a very vintage matte black, greaser-style teardrop and would like to avoid the modern-looking rectangle and round corner windows with the heavy rubber edges. The real boat portholes are neat, but are just too massive.
Any suggestions would be great.
Any suggestions would be great.
- Forrest Ebbs
by Shrug53 » Mon Jun 28, 2004 5:48 pm
They make windows like that for vans (a buddy had one in high school)
Check out this link:
http://www.cyclevan.com/vanwindows.htm
You could probably find them in junkyards dirt cheap!
If you want an actual porthole window that you can open, go to this site that sells windows for boats:
http://www.nauticaltropical.com/store/Portholes4.htm
It also would not be too hard or expensive to just go to an auto glass shop and have a round piece cut, then mount it with some simple flexible trim from the auto parts store.
Check out this link:
http://www.cyclevan.com/vanwindows.htm
You could probably find them in junkyards dirt cheap!
If you want an actual porthole window that you can open, go to this site that sells windows for boats:
http://www.nauticaltropical.com/store/Portholes4.htm
It also would not be too hard or expensive to just go to an auto glass shop and have a round piece cut, then mount it with some simple flexible trim from the auto parts store.
"Better living through reckless experimentation"
http://www.forgottenclassics.com
http://www.forgottenclassics.com
-
Shrug53 - 500 Club
- Posts: 546
- Joined: Tue Jun 08, 2004 9:17 am
