Fiberglass Board
2 posts
• Page 1 of 1
Fiberglass Board
by pwrdbytoyota » Mon Mar 07, 2005 11:05 pm
I found some 1/8 fiberglass board at my local lowes. The only problem is one side is textured. Do you think I could flip this over (Textured side down and use it as an outer layer for my teardrop. I am going to paint the exterior when I am done with some 2 part epoxy paint. Just curious?
- pwrdbytoyota
- Teardrop Inspector
- Posts: 4
- Joined: Thu Mar 03, 2005 9:44 pm
- Location: Virginia
by BufordT » Tue Mar 08, 2005 4:36 am
Sounds like you are talking about FRP. If so I placed the textured side down to the plywood on my mini-hopper. Smooth side out. Works fine.
Must paint or epoxy as you stated.
Bufordt
Must paint or epoxy as you stated.
Bufordt
"RUSH" The Man, The Legend, The Way Of Life.
-
BufordT - 2nd Teardrop Club
- Posts: 661
- Images: 23
- Joined: Wed Apr 14, 2004 3:50 pm
- Location: Palm Bay Fl.