Almost there (pics)

Anything to do with mechanical, construction etc

Almost there (pics)

Postby legend lime » Wed Aug 08, 2007 8:48 pm

Well i am alsomt there not much more to do, I completed the cabinets execpt for the slide out on the left side. I still have to deside what i am going to use as a sink and water supply system. I am not going to use the wheels & tires you see on it now they are just to move it around i got tired of looking at the ones that were on there for the build so I changed them out for the ones from the 05 Mustang I used to have, I've got to find some wheels with a 5" side off set on the back side and so far I haven't had much luck at finding what I need or want.


Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Legned Lime, Acworth, GA
User avatar
legend lime
Teardrop Master
 
Posts: 100
Images: 252
Joined: Sun Oct 29, 2006 7:51 pm
Location: Acworth, GA

Postby Micro469 » Wed Aug 08, 2007 8:58 pm

Man... That is one good looking puppy.... On the top piece of your stove drawer, could you put a small ..3/4" lip? That way you can use it to hold stuff while cooking with less of a chance of anything rolling off.. I can't really see how much clearance you have between it and the top of the stove when closed.......

:thumbsup: :thumbsup: :thumbsup:
John
Image
User avatar
Micro469
Super Lifetime Member
 
Posts: 3185
Images: 382
Joined: Mon Nov 07, 2005 10:46 pm
Location: Brampton,Ontario,Canada

Postby asianflava » Wed Aug 08, 2007 8:59 pm

Very Nice! :thumbsup:
User avatar
asianflava
8000 Club
8000 Club
 
Posts: 8412
Images: 45
Joined: Mon Aug 02, 2004 5:11 am
Location: CO, Longmont
Top

Postby Airspeed » Wed Aug 08, 2007 9:06 pm

Absolutely BEAUTIFUL !!!!!!!!!!!!!!!!
VERY,VERY NICE WORK!!!!!! Aaron
User avatar
Airspeed
500 Club
 
Posts: 718
Images: 16
Joined: Sun Mar 04, 2007 7:26 pm
Location: North California
Top

Postby legend lime » Wed Aug 08, 2007 9:14 pm

Thanks Micro469;
Ya I've been looking at doing that and putting some screw in hooks into the edge of it also to hang pot holders and other things also.

Thanks; asianflava
Legned Lime, Acworth, GA
User avatar
legend lime
Teardrop Master
 
Posts: 100
Images: 252
Joined: Sun Oct 29, 2006 7:51 pm
Location: Acworth, GA
Top

Re: Almost there (pics)

Postby Micro469 » Wed Aug 08, 2007 9:22 pm

legend lime wrote:Well i am alsomt there not much more to do, I completed the cabinets execpt for the slide out on the left side. I still have to deside what i am going to use as a sink and water supply system. I am not going to use the wheels & tires you see on it now they are just to move it around i got tired of looking at the ones that were on there for the build so I changed them out for the ones from the 05 Mustang I used to have, I've got to find some wheels with a 5" side off set on the back side and so far I haven't had much luck at finding what I need or want.


Image
??????????
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image



:roll: 8) :lol: ;) :thumbsup:
John
Image
User avatar
Micro469
Super Lifetime Member
 
Posts: 3185
Images: 382
Joined: Mon Nov 07, 2005 10:46 pm
Location: Brampton,Ontario,Canada
Top

Postby Nobody » Wed Aug 08, 2007 9:22 pm

Great lookin' TD - I think you 'done' that one just about right :thumbsup:
Harvey -

- - - - - - - - - - - - - - - -

Doing the right thing ain't always easy but, . . . it's always right!
User avatar
Nobody
1000 Club
1000 Club
 
Posts: 1196
Images: 342
Joined: Wed Jan 25, 2006 1:09 pm
Location: Benton, Arkansas
Top

Postby SaGR » Wed Aug 08, 2007 10:06 pm

DAMN NICE!!! :thumbsup: :thumbsup: :applause:
Building a small bowtop Vardo
Build thread: http://tinyurl.com/yk4hnmd

Generic Benroy: Sold to FIL/MIL
User avatar
SaGR
The 300 Club
 
Posts: 487
Images: 21
Joined: Fri May 25, 2007 9:29 am
Location: Illinois, Lisle
Top

Postby Miriam C. » Wed Aug 08, 2007 10:08 pm

:thumbsup: :applause: :applause: :applause:
I love the cabinets and especially the doors and counter... You have done a spectacular job... :beautiful:
“Forgiveness means giving up all hope for a better past.â€
User avatar
Miriam C.
our Aunti M
 
Posts: 19675
Images: 148
Joined: Wed Feb 15, 2006 3:14 pm
Location: Southwest MO
Top

Postby Dave Bob » Thu Aug 09, 2007 12:45 am

SUPER... :thumbsup: :thumbsup: 8)

Dave
Never say "What else could go wrong?"
Because it usually will.
User avatar
Dave Bob
Teardrop Advisor
 
Posts: 92
Images: 26
Joined: Sun Jun 25, 2006 6:48 pm
Location: North West, Louisiana
Top

Postby Classic Finn » Thu Aug 09, 2007 4:20 am

Man that is Beautiful..Nice Work.

Classic Finn ;)
Royal Teardrop Society Scandinavian Bureau Chief of Staff

Image
User avatar
Classic Finn
Midnight Sun Voyager
Midnight Sun Voyager
 
Posts: 17488
Images: 146
Joined: Fri Apr 29, 2005 4:29 am
Location: Country of Finland
Top

Postby Jst83 » Thu Aug 09, 2007 4:42 am

:thumbsup: Very nice, Love the wood
Image
User avatar
Jst83
3000 Club
3000 Club
 
Posts: 3606
Images: 215
Joined: Thu Jul 20, 2006 7:33 pm
Location: Indiana, Greenfield
Top

Postby benzu » Thu Aug 09, 2007 11:37 am

WOW!!!!! :applause: :applause: :applause: :applause: :thumbsup:

Mike
User avatar
benzu
Teardrop Master
 
Posts: 230
Images: 119
Joined: Mon Feb 05, 2007 4:37 pm
Location: Denver, Colorado
Top

Postby bledsoe3 » Thu Aug 09, 2007 12:16 pm

Nice work! You'll be camping soon.
If you do what you've always done, you'll get what you've always got.
User avatar
bledsoe3
3000 Club
3000 Club
 
Posts: 3694
Images: 112
Joined: Tue Jun 07, 2005 5:55 am
Location: Oregon, Portland
Top

Postby Big DE » Thu Aug 09, 2007 12:59 pm

Absolutely gorgeous wood work :shock: is that wood flooring? also I was wondering where you got the vents on the side? I need some to vent my A/C

Big De
User avatar
Big DE
Teardrop Master
 
Posts: 201
Images: 93
Joined: Thu Aug 31, 2006 3:10 pm
Location: MANVEL,TX
Top

Next

Return to Teardrop Construction Tips & Techniques

Who is online

Users browsing this forum: No registered users and 3 guests