water inlet

[benzu]

Somewhere on this site I saw a really nice water inlet for the outside, it was steel or something similar and it was used originally for a boat or something like that. Does anyone know what I'm talking about and do you have specs and or pictures.


Thanks,

Mike

[Sonetpro]

Mike, I used a stainless boat water fill on mine.





Here is one on ebay for a good price.

http://cgi.ebay.com/ebaymotors/New-316- ... enameZWDVW

[Ken A Hood]

I picked up a couple different ones when I first started think about my build....a gravity fed one and the other gets hooked up to the water supply. Both are 316 Stainless, and I got them both on eBay

[benzu]

Mike, I used a stainless boat water fill on mine.





Here is one on ebay for a good price.

Thanks so much Steve, I just bought it. Can't wait to get it. Do you want to buy a tacky plastic water inlet, still in it's bag. You probably will find it on ebay soon.

Mike

[benzu]

Steve is that plug for a 120v connection? If so where did you get that?

Mike

[Sonetpro]

Steve is that plug for a 120v connection? If so where did you get that?

Mike

Yes that is a 120v inlet. It is a Marinco shore power for a boat. I like it cause it is waterproof even when plugged in. You need to shop hard for that one. I don't remember where I got it but it was $$$.
I used almost all marine fixtures for my tear. I built it to be a beach camper and anything else would not stand up to the salt air.
I used boat lights, cabinet catches, hinges and even a sailboat prism for a skylight. It all fit in with my theme and I found the quality superior to rv fixtures.



http://www.marinco.com/scpt/ProdPage.ph ... e%20Power#

[benzu]

$110.00

Too much for my budget.


Thanks for looking,


Mike

[Mary K]

Mike, try bass Pro Shop for the power inlet http://tinyurl.com/2cjfyt


14 BuckaRoonies!!

Mk

[benzu]

Thanks Mary K,

We have a Bass Pro shops about a half mile away from where I work I'll go check it out after work.


Mike

[Mary K]

Thanks Mary K,

We have a Bass Pro shops about a half mile away from where I work I'll go check it out after work.


Mike

Lucky Smuck!!!

[benzu]

Just to rubb it in, some time next year I will have a Cabelas about 5 miles away from where I live.

Mike

[Mary K]

Just to rubb it in, some time next year I will have a Cabelas about 5 miles away from where I live.

Mike

OH REALLLYYYYYY!!!??? Double SMUCK!!


Mk

[nikwax]

I picked up a couple different ones when I first started think about my build....a gravity fed one and the other gets hooked up to the water supply. Both are 316 Stainless, and I got them both on eBay

the one on the left: it hooks to a hose, correct?

[Ken A Hood]

Yes, it's a gravity feed inlet, same style as what Sonetpro used.

[nikwax]

and even though the photo on Ebay says "gas," it actually says "water," correct?