Roly Nelson wrote:Heikki, my scandihovian buddy, have you forgotten about the 1/2 Nelson wooden fenders? They are made of 1/8" plywood, secured in a routed groove in the side wall trim and the outer fender trim member. They are so strong that I can stand on them. They are coated inside with truck bed liner and probably have 20 or 30 glue blocks on the underside to secure them firmly to the tear body. Will surely hold up well in the land of the midnight sun. You can see some pics of how I made them in my construction pics, shown in the URL below.
Du kan inta ferglema, at tra ar bra, men aluminum ar bettra. (wood is good, but alum. is better)
Till nesta gongan..........Roly
God Morgon min vänn Roly.. Det måste jag planera--
Im going to take a look at my Swedish friends build again...thank you for reminding me...
You sure do have a nice set on your well made tear ...and a beeutiful one at that..
Hälsning från min hela familijen till dej..
Heikki
