Got My Ford Lights - Now What?

[campadk]

Well received my stop/turn signal lights from Westcott's today. Only took about 10 days! Not bad considering I'm in Canada. Duty/brockerage fees were a bit of a killer though...

Just wondering how these are going to look now since the light mounts are pretty long. Hopefully nobody uses them as a handle either. I'll be able to get the tear out of its shed in a week or two when the last of the snow is gone to check em out.

Has anyone else used these on their fenders? Seems to me I've seen a photo of someones tear with these... not sure if they were that long though. Anybody have some close up photos?

On the plus side, I'll have another place to hang dirty clothes

Here are the lights...



Here are the fenders I'll be using...

[doug hodder]

I gave a lot of thought to those lights, I wanted something retro, but more current, I'm going with 1940-54 GM pick up lights. glass lenses, blue dot. I am going to mount them to the side of the trailer. I don't have a bracket, need to make something up. I looked into getting the same brackets, but they won't mount up to my lights as the mounting bolts on my lights are off set, not parallel. I've got the same fenders too. Cool lights !! And I'll bet if someone uses them like a handle or a step, they'll only do it once...... Doug Hodder

[kurtibm]

Here's a pic from eBay...

[ALAN GEDDES]

They will look great and are actually quite solid when mounted. The curve of the fender will pretty well determine where they will mount.

[Ken]

I really think I need your Ford taillights, Google, Westcott and Ford taillights does not get me anywhere, Where did you get them?

[Kevin A]

I really think I need your Ford taillights, Google, Westcott and Ford taillights does not get me anywhere, Where did you get them?

I think this is the Westcott's that the tail lights came from:
Westcott's Auto Restyling
119701 SE Hwy 212
Bortng. OR 97009
800-523-6279: FAX: 503-658-2938
Mail order and open shop. Monday-Friday 9-5:30 Saturday 9-5
PST. Specializes in fiberglass replacement fenders and bodies
and reproductton body parts for 1926-1948 Ford cars and 1926-
1956 Ford plckups.

I wasn't able to find a web address for them though.

[SteveH]

I really think I need your Ford taillights, Google, Westcott and Ford taillights does not get me anywhere, Where did you get them?

Ken,

You have a So-Cal Speed shop in the Houston area. You should be able to get them over the counter there.

[Kevin A]

I did a bit more digging & found the thread that mentioned the supplier of the tail lights http://www.mikenchell.com/forums/viewtopic.php?p=25292#25292 Also, here's the link to Westcott's website http://wescottsauto.com/

[IraRat]

While we're on the subject of lights:

I'm just starting to look at the Cubby manual, and I haven't done a thing yet construction-wise using a Harbor Freight chasis, but...

Can I ignore the light wiring installation for now if I want to do something cool like this when the time comes, or do I still have to run the basic wiring now while modifying the chasis?

[TomS]

I think I'm going to go with the 1928 Ford tail lights too. I ordered some diamond plate alumuminum fenders from Cabelas http://tinyurl.com/48q9w I got them in this week. I think the Ford tail lights will look really sweet mounted on these fenders.

[mikeschn]

We've always pulled our trailer wiring when we were almost done.

Why?

First of all, we don't mind climbing around under the trailer...

secondly, we come up thru the floor of the teardrop...

thirdly, we pull the wires up to the galley lid, and then wire our taillights there...

It works for us...



Mike...

While we're on the subject of lights:

I'm just starting to look at the Cubby manual, and I haven't done a thing yet construction-wise using a Harbor Freight chasis, but...

Can I ignore the light wiring installation for now if I want to do something cool like this when the time comes, or do I still have to run the basic wiring now while modifying the chasis?

[MtnDeb]

I need to replace the wiring on my HF trailer. I'm keeping there lights. What size should I use for their 12V lighting?

Thanks .....

[len19070]

Though I didn't go for the Chrome ones, I think they look Pretty good!





Happy Trails

Len

WOW! Just realized how old this topic was!