Intro and a shout out to Chicken Legs

[Bronco302]

I've been reading here for a couple of months and have started a Weekender, love the design Mike. All this info has gotten me started off well, thanks all. I'm 50 been married to the same gal for 28 years (yes you may bow your head for Her, two daugthers, one granddaugther. I'll try almost anything I get into my head. I am taking photos although not as many as I should. I'm not much of a talker so you most likely woun't me post much but I'll try to get an album started. Thank you all again.

Chicken Legs the frame from your Lark popup looked just like the Wheel Camp frame I am using. I shortened it, narrowed it from one side, reused the springs,redid the tounge with 3x2x11ga. tube and got this axle from Northern tool, http://www.northerntool.com/webapp/wcs/ ... _200330479 ended up 5x8 about 260# rolling.I didn't take any photos as I work the frame but have some with my deck in place, I'll try to post the next couple of days.

Joe

[Chicken Legs]

Good luck with the build!

[Mike C.]

Hey Joe,

Welcome to the forum. If you've read here for a couple of months and have already started your trailer then all I can say is " GitRDun".

See you around.

[Miriam C.]

To the playground Joe. Look forward to seeing what your working on.

Keep the bubble oil level.