GLUE

[smitty2]

What type brand of glue should be used for making the sandwich panels on the roof and sides?
Smitty2
Do you glue the foam insulation to the plywood?

[planovet]

I used Tightbond II on my floor and I am very satisfied. Haven't got to the sides or roof yet. From what I have read on this site, it seems to be a popular brand.

[mikeschn]

Titebond III is the only way to go. Let me see if I can find the previous glue discussion.

Mike...

edit: here is one... there are others...
http://tnttt.com/viewto ... iii#256731

[tinksdad]

I started my floor today. And I have to say I'm glad I read the discussions on glue in the forums. The sales associate at the Depot tried his darndest to talk me into Gorilla Glue; but after reading the threads here, I stuck with my choice to go with Tite-Bond III. The directions on the bottle say to leave the pieces clamped for 30 minutes, which I did; but I had to check at least once, and those pieces weren't moving after 5 minutes!!!

I think the glue alone would have held, but I put screws in any ways.