Robinson sheetmetal screw removal

Anything to do with mechanical, construction etc
Post a reply

Robinson sheetmetal screw removal

Postby Sparky » Sat Jun 28, 2008 1:23 pm

I have been tring to remove the awning rail for the 1957 Trotwood canned ham, after exausting all my ideas and also purchasing the Craftmans Screw Removal Kit, I can only get out 1 of every 5. I now have many with drilled out heads, screw is still holding. :( Any ideas?
Sparky
Teardrop Builder
 
Posts: 40
Images: 2
Joined: Wed Jun 06, 2007 8:50 am
Location: Western North Carolina
Top

Postby apratt » Sat Jun 28, 2008 1:57 pm

I have used a dremel tool with a cut off disc to grind a straight slot so I can use a regular screwdriver.
Arthur,

ASL spoken here
User avatar
apratt
Gold Donating Member
 
Posts: 966
Images: 16
Joined: Fri Feb 24, 2006 11:43 pm
Location: Washington, Chehalis
Top

Postby toypusher » Sat Jun 28, 2008 1:58 pm

You may want to use a Dremel or similar tool to just grind the heads off and remove the trim that way!!
User avatar
toypusher
Site Admin
 
Posts: 43040
Images: 324
Joined: Fri Jan 28, 2005 12:21 pm
Location: York, PA Area
Top

Postby Jiminsav » Sat Jun 28, 2008 10:11 pm

about 8 ounces of C4 in a shaped charge would probably get it off..
Jim in Savannah
If you can read this bumper sticker, my camper fell off.
User avatar
Jiminsav
3000 Club
3000 Club
 
Posts: 3059
Images: 40
Joined: Sat Apr 17, 2004 8:49 pm
Location: Georgia, Savannah
Top

Postby Jiminsav » Sat Jun 28, 2008 10:12 pm

no really..just drill the heads off, grind down the stems and put new screws in at different places.
Jim in Savannah
If you can read this bumper sticker, my camper fell off.
User avatar
Jiminsav
3000 Club
3000 Club
 
Posts: 3059
Images: 40
Joined: Sat Apr 17, 2004 8:49 pm
Location: Georgia, Savannah
Top
Post a reply

Return to Teardrop Construction Tips & Techniques

Who is online

Users browsing this forum: No registered users and 6 guests

Custom Development by Motivo Solutions | Powered by phpBB® Forum Software © phpBB Group