Corner sink

Anything to do with mechanical, construction etc

Corner sink

Postby Jim T » Tue Jun 24, 2008 10:54 am

Hello everyone! :D
I have been thinking about putting a small sink in the corner of the WC of my trailer. I am definatly going to use the SS bowl idea mentioned in another post :twisted: but I am wondering about the water supply. I am toying with the idea of using a small pump up sprayer stored under the cabinet and running it to a single valve connected to a faucet. Does this sound like it would work, or does anyone else have a better idea that I could steal? :thinking:
Thanks, Jim
User avatar
Jim T
Teardrop Advisor
 
Posts: 82
Images: 20
Joined: Wed May 14, 2008 9:12 am
Location: Dallas area, Texas

Postby bobhenry » Tue Jun 24, 2008 11:16 am

Growing older but not up !
User avatar
bobhenry
Ten Grand Club
Ten Grand Club
 
Posts: 10368
Images: 2623
Joined: Fri Feb 09, 2007 7:49 am
Location: INDIANA, LINDEN

Postby madjack » Tue Jun 24, 2008 11:19 am

Jim, for cost, that would be hard to beat...you can also use a "manual' pump faucet...a bit more pricey but you wouldn't be constantly pumping up the sprayer
madjack 8)
...I have come to believe that, conflict resolution, through violence, is never acceptable.....................mj
User avatar
madjack
Site Admin
 
Posts: 15128
Images: 177
Joined: Thu Dec 02, 2004 5:27 pm
Location: Central Louisiana
Top

Postby MrBuzz » Tue Jun 24, 2008 11:28 am

Jim;
Someone posted a gravity fed outdoor sink/faucet arrangement...the water jug sat on a shelf on the TD roof.
Maybe you could mount a water just on the wall or ceiling and run a flexible hose to a small faucet. It could be as simple as a 2 liter soda bottle on a hook like a hospital IV stand...that would be plenty of water for a few hand washings and wouldn't take up much room at all.
For a limited use application like this maybe that would work with very little engineering.
Generic Benroy - built 2007, 4X8, 1175 HF trailer, Structoglass roof and headliner, 12v and 110v electrics with Schumacher charger.
User avatar
MrBuzz
Teardrop Master
 
Posts: 261
Images: 77
Joined: Mon Apr 02, 2007 9:13 pm
Location: Wisconsin, Eau Claire
Top

Postby bobhenry » Tue Jun 24, 2008 1:44 pm

I lucked out last fall and scored an a/c and a d/c demand pump got both for $5.00 . That $2.50 each for $45.00 pumps. Still gonna mount 4" pvc belly tank under floor and pump water to the faucet. I will still carry drinking water in an approved jug for cooking and drinking but cleanup should be much easier. I was originally going to use air pressure to deliver the water much as you are suggesting. We have learned 18" of 4" pvc is 1 gallon of water !
Growing older but not up !
User avatar
bobhenry
Ten Grand Club
Ten Grand Club
 
Posts: 10368
Images: 2623
Joined: Fri Feb 09, 2007 7:49 am
Location: INDIANA, LINDEN
Top

Postby Jim T » Wed Jun 25, 2008 8:36 am

Thanks for the advice everyone. I think I am going to try to incorporate all of the ideas. I am going to test out the gravity fed model and see if it supplies enough pressure (I will have a 3 ft drop). If it does, I can use that for a while and then easily adapt the pump up faucet. Maybe I can ask for that for Christmas!!! :applause:
Thanks for your help, Jim
User avatar
Jim T
Teardrop Advisor
 
Posts: 82
Images: 20
Joined: Wed May 14, 2008 9:12 am
Location: Dallas area, Texas
Top

Postby fornesto » Thu Jun 26, 2008 5:05 pm

If you know any nurses, maybe you can get an IV bag. Just a thought...a creepy creepy thought. (At least I didn't mention the other kind of medical bag.)
User avatar
fornesto
Donating Member
 
Posts: 774
Joined: Fri Jun 25, 2004 5:12 pm
Location: Lodi, CA
Top

Postby planovet » Thu Jun 26, 2008 7:32 pm

fornesto wrote:If you know any nurses, maybe you can get an IV bag. Just a thought...a creepy creepy thought. (At least I didn't mention the other kind of medical bag.)


The normal IV bag holds only 1 liter of fluid (about 1 quart). Not much volume and the tubing is really small. I have cabinets full of them at work. :lol:
ImageMark (& Cindi)
Visit our website: Little Swiss Teardrop

I was wondering why the water balloon was getting bigger... and then it hit me.

ImageImageImageImage
User avatar
planovet
The Cat Man
 
Posts: 5583
Images: 3
Joined: Tue Nov 27, 2007 4:48 pm
Location: Plano, Texas
Top

Postby Jim T » Fri Jun 27, 2008 6:58 pm

Since it is very possible that I would be using this sink to brush my teeth, I think I will stay away from the IV bag, and especially the other one! :shock:
Thanks for the ideas, though. :lol:
Jim
User avatar
Jim T
Teardrop Advisor
 
Posts: 82
Images: 20
Joined: Wed May 14, 2008 9:12 am
Location: Dallas area, Texas
Top

Postby Platbiker » Sun Jun 29, 2008 9:22 pm

Regarding I.V. bag:
http://www.msrgear.com/hydration/dromedary.asp

I have several of these guys and they're great, they are tough ( you can step on them- heck I'd give even money that you could run your car over it....) enough to work and come in multiple sizes there is a suck tube for using it as a hydration bladder like a "Camelback", as well as a shower head assembly(which I don't know to recommend, as its geared more to the backpacking crowd,...kinda flimsy for everyday use...) that could be modified to work with a real shower head or something....
User avatar
Platbiker
Teardrop Builder
 
Posts: 36
Images: 2
Joined: Sun Sep 10, 2006 6:10 pm
Location: Salt Lake City,Utah
Top


Return to Teardrop Construction Tips & Techniques

Who is online

Users browsing this forum: No registered users and 10 guests