Wheel Spacers

[Creamcracker]

I know I've mentioned this before but now as I'm getting ready to install the fenders I'm more concerned about the space between the tire and the side wall. The fender I am using has a skirt on the rear and that is even further reducing the distance between wheel/wall. If I go with a spacer anyone know where from? I figure a 1/2 wide spacer would be sufficient. I have a HF trailer with the 12" 4 lug wheels.
Philip

[Dale M.]

Spacers might be available at your local "custom" wheel (hot rod) tire and wheel emporium.... Also several internet sources.... Use Google search for "wheel spacers".... With 1/2 inch spacer, be sure you studs or lug bolts have enough threads available to property hold wheel when spacer is in place. you should have to at least 1 to 2 threads showing on stud when everything is secure.... With spacers, longer studs may be in order.....

Dale

[emiller]

I just ordered some the other day from here http://www.ezaccessory.com/Wheel_Adapte ... 0-5450.htm

[Creamcracker]

I know I've mentioned this before but now as I'm getting ready to install the fenders I'm more concerned about the space between the tire and the side wall. The fender I am using has a skirt on the rear and that is even further reducing the distance between wheel/wall. If I go with a spacer anyone know where from? I figure a 1/2 wide spacer would be sufficient. I have a HF trailer with the 12" 4 lug wheels.
Philip

How does one measure the lug nut arrangement? On my 4 lug HF trailer how do I determine the bolt pattern? Are they measured diagonally? Or just from one to the other. I looked at my spec sheet for my trailer but it doesn't show anything.

Philip

[planovet]

How does one measure the lug nut arrangement? On my 4 lug HF trailer how do I determine the bolt pattern? Are they measured diagonally? Or just from one to the other. I looked at my spec sheet for my trailer but it doesn't show anything.

Philip

Try here: Bolt circle

[Creamcracker]

How does one measure the lug nut arrangement? On my 4 lug HF trailer how do I determine the bolt pattern? Are they measured diagonally? Or just from one to the other. I looked at my spec sheet for my trailer but it doesn't show anything.

Philip

Try here: Bolt circle

That looks like it's for a 5 lug nut only. Unless I'm reading it incorrectly.
Philip

[planovet]

That looks like it's for a 5 lug nut only. Unless I'm reading it incorrectly.
Philip

Dang, you are right. I didn't catch the 4 lug statement in your post. Sorry