How to remove old tape etc from Out side of tralier

Anything to do with mechanical, construction etc

How to remove old tape etc from Out side of tralier

Postby Popeye » Sun Aug 10, 2008 4:59 pm

I was using my trailer in the winter and put plastic on the outside of the windows. Now there is tape that I don't know how to remove without damaging the paint. Can some one help me.
Thanks
Popeye
Teardrop Inspector
 
Posts: 2
Joined: Sun Aug 10, 2008 4:52 pm
Location: Montreal, Quebec, Canada

Postby james tillitt » Sun Aug 10, 2008 6:11 pm

They make an adhesive remover for such a purpose, but you probably don't have any on hand. I have used WD40 to remove tape glue and then washed off the WD40 with dish soap. :)
User avatar
james tillitt
Teardrop Advisor
 
Posts: 96
Images: 18
Joined: Thu May 17, 2007 6:22 pm
Location: eugene or

Postby Lgboro » Sun Aug 10, 2008 6:57 pm

I use goof off or goo gone for that purpose. I always try a small spot to be sure it doesn't react with the finish. Either one will soften the glue so that it will wipe off easily.
User avatar
Lgboro
500 Club
 
Posts: 708
Images: 53
Joined: Sun Apr 06, 2008 7:57 am
Location: Dudley, NC
Top

Postby S. Heisley » Sun Aug 10, 2008 8:44 pm

It's going to depend on the kind of finish you have on your trailer.

Don't use Goof-off for goo removal. I've used Goof-off to remove paint and bathroom tub and sink sealants!

I wasn't certain about Goo-Gone, so, I tried some on an exterior water-base house paint can just now. With very little rubbing, it removed the paint also.

Since I've used baby oil to remove medical tape goo on skin I tried it on the paint can. To my surprise, even that started to remove the paint from the paint can!

Maybe your best bet would be soaking it with water with a lot of dish soap in it and using one of those "can't scratch" plastic scrubbers, very, very gently? Or, maybe careful but tedious scraping with your fingernails? Got a girlfriend or wife? Offer her a manicure and spa treatement in trade! :lol: :lol: :lol:

How about using a tarp and a tie-down rope to cover it next year?!
User avatar
S. Heisley
Super Lifetime Member
 
Posts: 8873
Images: 495
Joined: Mon Sep 17, 2007 10:02 am
Location: No. California
Top

Postby swissarmygirl » Sun Aug 10, 2008 9:17 pm

I would try either baby oil or rubbing alcohol.
"Sometimes I wonder whether the world is being run by smart people who are putting us on or by imbeciles who really mean it." - Mark Twain
"The intuitive mind is a sacred gift and the rational mind is a faithful servant. We have created a society that honors the servant and has forgotten the gift." - Albert Einstein

4 Hats Studio
User avatar
swissarmygirl
Donating Member
 
Posts: 25906
Images: 129
Joined: Thu May 25, 2006 6:52 am
Location: New Jersey
Top

Postby S. Heisley » Sun Aug 10, 2008 9:22 pm

Swissarmygirl's idea of trying alcohol is a good one!

I'd try that.
User avatar
S. Heisley
Super Lifetime Member
 
Posts: 8873
Images: 495
Joined: Mon Sep 17, 2007 10:02 am
Location: No. California
Top

Postby Hoosier Greg » Sun Aug 10, 2008 10:26 pm

Try using a hair dryer on it.

HG.
Hoosier Greg
Teardrop Master
 
Posts: 114
Joined: Wed Jun 11, 2008 10:22 am
Location: Auroara,IN
Top

Postby GPW » Mon Aug 11, 2008 5:36 am

Second on the hair dryer, works for us...
There’s no place like Foam !
User avatar
GPW
Gold Donating Member
 
Posts: 14920
Images: 546
Joined: Thu Feb 09, 2006 7:58 pm
Location: New Orleans
Top

Postby M B Hamilton » Mon Aug 11, 2008 7:14 am

If the tape hasn't been pulled (what I think you indicate), warming with a hair dryer is a good starting point. Use enough heat to soften the adhesive. Any residue adhesive will probably respond to softening with vegetable oil (that has to sit a while). We use Olive Oil, but that's just because it's all we have in the kitchen. :lol:

For everyone: honest, get yourself a roll of Gaffer's Tape. It's waterproof, has a strong fabric backing and the adhesive is rubber based. It's designed to peal off cleanly and not damage the underlying surface.
M B Hamilton
Teardrop Master
 
Posts: 169
Images: 38
Joined: Thu Oct 06, 2005 1:56 pm
Location: Harwinton, CT
Top

Postby dmckruit » Mon Aug 11, 2008 7:15 am

Use a heat gun with a plastic putty knife. Then use mineral spirits or naptha to clean off the residue.
User avatar
dmckruit
The 300 Club
 
Posts: 385
Images: 212
Joined: Thu Jul 10, 2008 1:44 pm
Location: Sarver, PA
Top


Return to Teardrop Construction Tips & Techniques

Who is online

Users browsing this forum: No registered users and 14 guests