Cast Iron in the Northwest-sold

Have a teardrop or a trailer for sale? Need one? Post here...

Cast Iron in the Northwest-sold

Postby dreadcptflint » Sun Aug 10, 2008 9:18 pm

My wife and I have recently come into a lot of Cast Iron. That we can not use all of so we want to part with some ot it to people that will use it. Here is the big picture:

Image

As you can see there is a lot here for almost everyone.

In the left from top. 3 #6 Wagner, #5 Wagner, #3 favorite piqua ware

In the middle from top: 10 1/2in Chicken Fryer, 9 inch skillet, 8 inch skillet, 7 inch skillet with dimples, 6 1/2 skillet

In the right from the top: #6 Griswald, #2108 Square Fry Skillet Griswald, #168 Square Utility Skillet Griswald, #3 Griswald skillet

These pieces came from a large collection from the pacific northwest. It has all been seasoned. If you are interested in a piece or the lot then please email: [email protected] .
Last edited by dreadcptflint on Sun Dec 14, 2008 2:42 pm, edited 1 time in total.
The quickest way to find me is on my business site. Yes, I do answer questions and provide quotes for free. Find me at: http://www.wenatcheefarmers.com
User avatar
dreadcptflint
1000 Club
1000 Club
 
Posts: 1080
Images: 19
Joined: Fri Jul 13, 2007 3:38 pm
Location: Wenatchee, WA

Postby Dean in Eureka, CA » Thu Aug 14, 2008 9:16 pm

Does that skillet in the middle row, third up from the bottom have an Indianhead medallion on the bottom?
Looks like it could be a Wapak Hollow Ware, but it might be a Wagner also...
User avatar
Dean in Eureka, CA
The Fogcrawler
 
Posts: 4997
Images: 69
Joined: Thu May 11, 2006 8:44 pm

Postby dreadcptflint » Thu Aug 14, 2008 11:03 pm

Dean,
That one is a sale in progress. It does not have an Indianhead medallion on the bottom. It does have the following on the bottom:

8 INCH SKILLET

Z


It is a heavy little pan, the T is offset and the pan is smooth as a baby's bottom.
The quickest way to find me is on my business site. Yes, I do answer questions and provide quotes for free. Find me at: http://www.wenatcheefarmers.com
User avatar
dreadcptflint
1000 Club
1000 Club
 
Posts: 1080
Images: 19
Joined: Fri Jul 13, 2007 3:38 pm
Location: Wenatchee, WA
Top

Postby doug hodder » Sat Aug 16, 2008 11:52 am

Is there a lid for the chicken fryer? Doug
doug hodder
*Snoop Dougie Doug
 
Posts: 12625
Images: 562
Joined: Tue Dec 14, 2004 11:20 pm
Top

Postby dreadcptflint » Sat Aug 16, 2008 4:55 pm

Doug,
The chicken fryer is still available. There is no lid. We ended up going down to the local sporting good store and found a lid for another pan.
The quickest way to find me is on my business site. Yes, I do answer questions and provide quotes for free. Find me at: http://www.wenatcheefarmers.com
User avatar
dreadcptflint
1000 Club
1000 Club
 
Posts: 1080
Images: 19
Joined: Fri Jul 13, 2007 3:38 pm
Location: Wenatchee, WA
Top

Postby devigata » Sat Aug 16, 2008 8:38 pm

Could you please give dimensions for the #168 Square Utility Skillet Griswald (right hand side, next to the bottom)?

No parting with a waffle iron, perchance? :thinking:

'Preciate it,

Cathy
User avatar
devigata
Donating Member
 
Posts: 282
Images: 82
Joined: Sun Apr 13, 2008 12:01 pm
Location: Orlando, Florida
Top

Postby dreadcptflint » Sat Aug 16, 2008 9:15 pm

The dimensions for the #168 Square Utility Skillet Griswald is 9 1/2 inches square and 2 inches deep. I have one waffle iron and sold another already.
The quickest way to find me is on my business site. Yes, I do answer questions and provide quotes for free. Find me at: http://www.wenatcheefarmers.com
User avatar
dreadcptflint
1000 Club
1000 Club
 
Posts: 1080
Images: 19
Joined: Fri Jul 13, 2007 3:38 pm
Location: Wenatchee, WA
Top

Postby devigata » Sun Aug 17, 2008 12:28 pm

dreadcptflint wrote:The dimensions for the #168 Square Utility Skillet Griswald is 9 1/2 inches square and 2 inches deep. I have one waffle iron and sold another already.


Thank you, but the hubby "sort of" said no.

It sounded like, "Where are you going to put it?" but after 19 years, I know that translated to "No".
User avatar
devigata
Donating Member
 
Posts: 282
Images: 82
Joined: Sun Apr 13, 2008 12:01 pm
Location: Orlando, Florida
Top

Postby doug hodder » Thu Aug 21, 2008 1:40 am

Anyone want chicken cooked in iron at the upcoming Jefferson State thing? I bought the skillet. Doug
doug hodder
*Snoop Dougie Doug
 
Posts: 12625
Images: 562
Joined: Tue Dec 14, 2004 11:20 pm
Top

Postby Eunice » Thu Aug 21, 2008 10:48 am

I love chicken! do you make the gravy to go with it? -
Eunice
former director
Jefferson State Chapter
TearJerkersImage
User avatar
Eunice
Jefferson State Tearjerker
 
Posts: 1440
Images: 109
Joined: Sun Jul 30, 2006 4:25 pm
Location: northern California, Fortuna
Top

Postby tinksdad » Thu Aug 21, 2008 11:42 am

To heck with chicken.... that looks just like the one I used to make my donuts in.

Unfortunately, it was one of the pieces that went to the "ex" during the divorce!! :cry: Come to think of it.... that was the only sticking point during the proceedings.... who got what pieces of CI!!!
User avatar
tinksdad
500 Club
 
Posts: 966
Images: 155
Joined: Mon May 05, 2008 9:20 pm
Location: Olive Branch, MS
Top

Postby dreadcptflint » Fri Aug 22, 2008 1:05 pm

Doug,

Just wanted to let you know the Chicken fryer went in the mail today, I hope you enjoy it.
:)

Suzie (Mrs. Dreadcptflint)
The quickest way to find me is on my business site. Yes, I do answer questions and provide quotes for free. Find me at: http://www.wenatcheefarmers.com
User avatar
dreadcptflint
1000 Club
1000 Club
 
Posts: 1080
Images: 19
Joined: Fri Jul 13, 2007 3:38 pm
Location: Wenatchee, WA
Top

Postby doug hodder » Fri Aug 22, 2008 5:00 pm

Looking forward to it! thanks...Doug
doug hodder
*Snoop Dougie Doug
 
Posts: 12625
Images: 562
Joined: Tue Dec 14, 2004 11:20 pm
Top

Postby dreadcptflint » Sun Dec 14, 2008 2:42 pm

Thanks folks. All the for sale stuff is gone. :thumbsup:
The quickest way to find me is on my business site. Yes, I do answer questions and provide quotes for free. Find me at: http://www.wenatcheefarmers.com
User avatar
dreadcptflint
1000 Club
1000 Club
 
Posts: 1080
Images: 19
Joined: Fri Jul 13, 2007 3:38 pm
Location: Wenatchee, WA
Top

Postby starleen2 » Sun Dec 14, 2008 2:47 pm

Thanks for sharing with us :thumbsup:
User avatar
starleen2
5th Teardrop Club
 
Posts: 16272
Images: 224
Joined: Sat May 12, 2007 8:26 pm
Location: Pea Ridge ,AR
Top


Return to For Sale/Wanted

Who is online

Users browsing this forum: No registered users and 0 guests