Hatch Seal question

Anything to do with mechanical, construction etc
Post a reply

Hatch Seal question

Postby Classic Finn » Sun Sep 21, 2008 1:08 pm

Hey folks I,m about to add seals to the hatch and now Id 1st like to seal up the very lower section that sits to the end of the tear frame.

Can anyone tell me how to do this please and what kinds of seal have you used?

I guess this photo is as good as any I have to show which seal is in question.

Image

Classic Finn ;)
Royal Teardrop Society Scandinavian Bureau Chief of Staff

Image
User avatar
Classic Finn
Midnight Sun Voyager
Midnight Sun Voyager
 
Posts: 17488
Images: 146
Joined: Fri Apr 29, 2005 4:29 am
Location: Country of Finland
Top

Postby Classic Finn » Sun Sep 21, 2008 5:09 pm

:roll: :roll: :thinking:
Royal Teardrop Society Scandinavian Bureau Chief of Staff

Image
User avatar
Classic Finn
Midnight Sun Voyager
Midnight Sun Voyager
 
Posts: 17488
Images: 146
Joined: Fri Apr 29, 2005 4:29 am
Location: Country of Finland
Top

Postby 2bits » Sun Sep 21, 2008 6:51 pm

I was planning on using Grant's Hatch seal on the side and bottom edges of the hatch, at the bottom of the page:

http://www.lilbear.teardrops.net/parts.html

$1 per foot.

Image
Thomas

Image
User avatar
2bits
2bit Member
 
Posts: 5132
Images: 8
Joined: Thu Dec 27, 2007 6:04 pm
Location: Lake Tawakoni, TX
Top

Postby SkipperSue » Mon Sep 22, 2008 7:46 am

2bits wrote:I was planning on using Grant's Hatch seal on the side and bottom edges of the hatch, at the bottom of the page:

http://www.lilbear.teardrops.net/parts.html

$1 per foot.

Image


I bought the same seal from Grant, but I haven't installed it yet.
Skipper
User avatar
SkipperSue
Gold Donating Member
 
Posts: 585
Images: 114
Joined: Thu Sep 14, 2006 7:12 am
Location: South Carolina, Table Rock
Top

Postby shadowhaus » Mon Sep 22, 2008 11:13 am

How does it attach? Do you glue it? Would that be used on the side wall or on the hatch?
User avatar
shadowhaus
Teardrop Builder
 
Posts: 30
Images: 22
Joined: Thu Jul 31, 2008 8:24 pm
Top

Postby Classic Finn » Mon Sep 22, 2008 11:41 am

I guess in all honesty I also have to ask as how that is installed?

Classic Finn ;) :thinking:
Royal Teardrop Society Scandinavian Bureau Chief of Staff

Image
User avatar
Classic Finn
Midnight Sun Voyager
Midnight Sun Voyager
 
Posts: 17488
Images: 146
Joined: Fri Apr 29, 2005 4:29 am
Location: Country of Finland
Top

Postby SkipperSue » Mon Sep 22, 2008 11:46 am

Classic Finn wrote:I guess in all honesty I also have to ask as how that is installed?

Classic Finn ;) :thinking:


I'm planning on gluing it on the hatch side with weather strip adhesive. I'm not sure if that's the way most do it or not but it seems like it should work ok.
Skipper
User avatar
SkipperSue
Gold Donating Member
 
Posts: 585
Images: 114
Joined: Thu Sep 14, 2006 7:12 am
Location: South Carolina, Table Rock
Top

Postby grant whipp » Mon Sep 22, 2008 1:14 pm

SkipperSue wrote:
Classic Finn wrote:I guess in all honesty I also have to ask as how that is installed?

Classic Finn ;) :thinking:


I'm planning on gluing it on the hatch side with weather strip adhesive. I'm not sure if that's the way most do it or not but it seems like it should work ok.


Hey, Guys ...

... it has a self-adhesive strip already on it ... :D ...!

CHEERS!

Grant
Celebrating Retirement after over 32 Years of Building, Promoting, Supporting, Supplying, Living the Lifestyle, and Loving Teardrop Trailers!
"Life Moves a Little Slower When You're On Teardrop Time"
The nature of Life, itself, is change ... "Those who matter, don't mind, and those who mind, don't matter."
Image
User avatar
grant whipp
Teardrop Manufacturer
 
Posts: 1815
Images: 117
Joined: Sun Jan 16, 2005 2:00 pm
Location: Jefferson State ('tween CA & OR!)
Top

Postby Classic Finn » Mon Sep 22, 2008 1:22 pm

grant whipp wrote:
SkipperSue wrote:
Classic Finn wrote:I guess in all honesty I also have to ask as how that is installed?

Classic Finn ;) :thinking:


I'm planning on gluing it on the hatch side with weather strip adhesive. I'm not sure if that's the way most do it or not but it seems like it should work ok.


Hey, Guys ...

... it has a self-adhesive strip already on it ... :D ...!

CHEERS!

Grant


Duahhhhhh.. Now if that aint easy enough then.. :lol: :o Straight from Da Man himself. No further questions :lol:

Thank You Grant :applause: :thumbsup: :oops:
Royal Teardrop Society Scandinavian Bureau Chief of Staff

Image
User avatar
Classic Finn
Midnight Sun Voyager
Midnight Sun Voyager
 
Posts: 17488
Images: 146
Joined: Fri Apr 29, 2005 4:29 am
Location: Country of Finland
Top

Postby SkipperSue » Mon Sep 22, 2008 5:50 pm

Yep this is true, but I was going to put some weather strip glue on the hatch side just to make sure it will stick real good. :R
Skipper
User avatar
SkipperSue
Gold Donating Member
 
Posts: 585
Images: 114
Joined: Thu Sep 14, 2006 7:12 am
Location: South Carolina, Table Rock
Top

Postby 2bits » Mon Sep 22, 2008 7:59 pm

grant whipp wrote:Hey, Guys ...

... it has a self-adhesive strip already on it ... :D ...!

CHEERS!

Grant



Nice! Thanks!
Thomas

Image
User avatar
2bits
2bit Member
 
Posts: 5132
Images: 8
Joined: Thu Dec 27, 2007 6:04 pm
Location: Lake Tawakoni, TX
Top
Post a reply

Return to Teardrop Construction Tips & Techniques

Who is online

Users browsing this forum: No registered users and 8 guests

Custom Development by Motivo Solutions | Powered by phpBB® Forum Software © phpBB Group