Hello there, a lurker emerges

[CaptainKram]

I plan on going 6'5" or so wide, as I want a transverse pull out gaucho type bed/couch. Please, no laughing on this one, but I'm thinking of adding in one of the rear corners, a combined port-a-potty and shower room using 1/2 walls and a shower curtain for when the rear is raised. I may have to offset the door from center a bit, but hopefully that won't look to funny.

Anyway,
Best Wishes
Stu

Hello from a fellow newbie planner. Check out 48rob's Cabin Car He did a really cool shower install. I think it might be what you're looking for.

CK

[mikeschn]

Photos of our trip to Watkins Glen!

http://www.mikenchell.com/Watkins_Glen_Photo_Album/

Mike...

[BillandMarijo]

Mikeschn,
Wow gorgeous pics.
Im green with envy.
Marijo

[sbraider]

A few pictures of tent camping trips I've led to the Finger Lakes National Forest are at http://www.knifeforums.com/forums/showt ... last/#LAST, but they do not allow trailers at the campsite, tents only.

[mikeschn]

Hey Stu,

Here's the first set of drawings... when I have some time I'll expand the set a little bit.

http://www.mikenchell.com/images/10ftww_stu.pdf

Have fun!

Mike...

[sbraider]

WOW, very interesting. TYVM

[EffieRover]

Hey there. We camp often in the Finger Lakes as well. Cayuga Lake is a favorite ... we usually drive down to Taughhanock (or however you spell it) for a day trip walking up the creek to the falls. My grandparents had a cabin on a small creek off of Cayuga Lake when I was a kid. Always loved your neck of the woods. Some great geocaching around there, too.

[mikeschn]

Okay, I revised the profile for you, and also added the chassis information. Don't use the original drawing I posted.

http://www.mikenchell.com/images/10ftww_stu.pdf

Mike...

[sbraider]

Mike,
Thanks for the drawings. I'll study them many times I am sure. You are the best.
Stu

[Cliffmeister2000]

Okay, I revised the profile for you, and also added the chassis information. Don't use the original drawing I posted.

http://www.mikenchell.com/images/10ftww_stu.pdf

Mike...

Mike, that is really nice drawing!

[mikeschn]

thanks Cliff,

I plan on adding a few more sheets this weekend; the important details about the hatch connection for example!

I might add some pictures too, like this for example...



Mike...

[sbraider]

Mike,
I really like this design concept. Thanks for sharing
Stu

[CaptainKram]

Mike,
I really like this design concept. Thanks for sharing
Stu

Me too What design program are you using?

[mikeschn]

The drawings are made in Turbocad. The models are made in either UG, Turbocad or Viacad.

Mike...

[sbraider]

thanks Cliff,

I plan on adding a few more sheets this weekend; the important details about the hatch connection for example!

I might add some pictures too, like this for example...



Mike...

Mike,
Pictures good, the more the better. The hard part is getting a design to fit my 6'3" height and wide shoulders.
Stu