Insulating TD Sides

Anything to do with mechanical, construction etc

Postby halfdome, Danny » Sun Nov 16, 2008 9:53 pm

My first teardrop was totally insulated and once we had condensation on the walls because the roof vent was closed (heavy rain) but the windows were open. The second teardrop is only insulated on the roof and galley hatch. I haven't yet had condensation on the walls or ceiling but I always open a window and crack the roof vent. Both teardrops are identical in size and shape. This suggests to me that proper ventilation is the key to preventing condensation. Insulated walls are quieter and somewhat warmer/cooler than non insulated. Is insulation worth the extra pounds? Only you can decide. :D Danny
ImageImage
"Conditions are never just right. People who delay action until all factors are favorable do nothing". William Feather
Don't accept "It's Good Enough" build to the best of your abilities.
Image
Teardroppers Of Oregon & WashingtonImage
User avatar
halfdome, Danny
*Happy Camper
 
Posts: 5894
Images: 252
Joined: Sun Aug 14, 2005 11:02 pm
Location: Washington , Pew-al-up

Postby ARKPAT » Mon Nov 17, 2008 3:17 am

Speaking of insulation. :lol: :D


This shows the left top corner of the galley area door of my trailer. If you have ever trimed too much off ( past the wood strip inside ) the bottom of an insulated Exterior Metal door that picture will look familiar. Sorry not all the screws are in this picture where the overlap of the panels at the corner that is shown. The rusty spot on the panels where primed and painted with Rust-inhibited paint / primer. Then they where covered by 1/4" Birch Luam to look nice. 8)
Image


This is the front of the same trailer before the panels where attached. Note the additional panels inside the trailer's box. That is what the entire trailer is made of. There are enought panels inside the trailer to make another trailer box with what is shown in the picture. ;)
Image

:thumbsup:

Pat

PS: Oh yes it is very easy to keep at any temp you want and you want the right amount of ventilation with such insulation ( R-19 all exposed surfaces by the way with 144 cubic foot of space inside ).
Life is to short always eat dessert first.
User avatar
ARKPAT
1000 Club
1000 Club
 
Posts: 1549
Images: 77
Joined: Tue Dec 13, 2005 4:45 am
Location: Arkansas

Postby Tripmaker » Mon Nov 17, 2008 8:30 am

dwgriff1 wrote:Unless you are building a barge, 3/4 plywood sides are a bit over kill.
dave


That may very well be true, but I would think building with a single layer of plywood would be easier than framing walls in order to insulate them. That being said, easier isn't always better. Sounds like about an even split on weather to insulate or not. As with most of the building ideas, there is no right answer. That's what makes our TD's special. They are all different and unique. ;)
Jim



I started with nothing and still have most of it left.
User avatar
Tripmaker
500 Club
 
Posts: 893
Images: 59
Joined: Fri Aug 18, 2006 12:09 pm
Location: Fort Wayne, IN
Top

Previous

Return to Teardrop Construction Tips & Techniques

Who is online

Users browsing this forum: No registered users and 6 guests