Teardrops n Tiny Travel Trailers

by **Guest** » Thu Jul 29, 2004 11:42 pm

I stumbled upon this site that has heavy duty drawer slides. Has anyone considered using these for a slide out or pop-up?
This slide here is rated for 600lbs.
http://www.austinhardware.com/product.asp?dept%5Fid=251&pf%5Fid=1606
(I added this website to the Source of Supply in the links section)

by **mikeschn** » Fri Jul 30, 2004 3:37 am

There ya go Dean,

Now take those slides and make this design work!!!

Mike...

by **Guest** » Fri Jul 30, 2004 11:00 am

Hey there Mike,
Is it possible to post images that are in my personal album here on this site, (that I uploaded from my computer) directly into my post like you have done above?
Or do all images shown directly in a post need to be on the internet and not behind a firewall?

The reason why I'm asking is because a did a post on suggest a gathering and I tried everything I could think of to get my images from my personal album to appear directly into the post and could not.

by **Shrug53** » Fri Jul 30, 2004 11:21 am

Hey Mike, doesn't that wood for your mock-ups get expensive? My local hobby store here charges about 3 bucks for a little 4" x 12" piece.

by **Flyfisher** » Fri Jul 30, 2004 11:25 am

I checked out slides for just such a design. I priced a 48" slide and they are $200 per pair. The load rating on them (or at least the ones I looked at) start at 500lbs for the 18" slides and started dropping off quickly after that. I figured it would be cheaper to design my own slid.

by **mikeschn** » Fri Jul 30, 2004 11:26 am

Dean in Eureka, CA wrote:Hey there Mike,
Is it possible to post images that are in my personal album here on this site, (that I uploaded from my computer) directly into my post like you have done above?
Or do all images shown directly in a post need to be on the internet and not behind a firewall?

The reason why I'm asking is because a did a post on suggest a gathering and I tried everything I could think of to get my images from my personal album to appear directly into the post and could not.

All images need to be on the internet to be able to display them as above.

There are a couple places that seem to work... check em out in this thread...
http://tnttt.com/viewtopic.php?t=573

Mike...

by **mikeschn** » Fri Jul 30, 2004 11:29 am

Shrug53 wrote:Hey Mike, doesn't that wood for your mock-ups get expensive? My local hobby store here charges about 3 bucks for a little 4" x 12" piece.

No, I don't go to the hobby store. Everything you see me cutting up is scraps from other projects, typically 1/4" luan or something similar.

Mike...

by **Chip** » Fri Jul 30, 2004 11:59 am

just happen tio have two pair left over from the pop up that use to be in the back yard,,,funny about it,,it aint there no more and a tear is taking its place,,seriously pay tha freight ,,dont know the rating on them but they are about 36 to 40 " long,,closed,,

chip

Teardrops n Tiny Travel Trailers

Slide Hardware

Slide Hardware

Who is online