More pictures of the framing, I've about finished glueing everything together:
Here's the A/C from the outside. There will be an access door over this when its skinned. There will also be a small fan in here to try and circulate air from the ceiling down to the bed area.
Here's the A/C from the inside. The panel above the A/C will hold the radio, switches, voltmeter, inverter switch, DC outlet and weatherstation.
I added another window for his and hers compatibility.
Here's the framing for the benches, I forgot to take a picture before I took it all apart.
I found this cool bench seat hinge on the internet, it makes adding a hinge to the seats real easy, especially if you fit everything before the walls are skinned.
Next I'll be taking everything apart down to the floor again so I can start skinning the walls and applying finish with everything flat. Oh and I have to paint the floor too.
Bruce