Help locating part.

[Endo]

Does anyone have a source for the trim piece above the windows (rain diverter?). I sent a PM to George but no response. I'm not sure if he got it. I found them once but I can't remember the site. If I remember correctly the cost is minimal.

Thanks Endo

[img]http://www.tnttt.com/gallery/image.php?image_id=3202[img][/img]

[goldcoop]

Endo-

Check this out:

http://www.teardropparts.com/sub-pages/ ... ldings.htm

Cheers,

Coop

[madjack]

...endo, we bought ours from a local RV dealer...seems they were less than 10 bucks for 2.......
madjack

[randy chesnutt]

if you are talking about drip rails. rv parts and supply has them. that,s where i got mine. they don,t cost much.

[angib]

I use an on-line catalogue (similar to a catalog!) that seems to cover a huge number of RV dealers all round the US. This page shows drip caps.

If you go to http://www.go-rv.com, you can find a local dealer that carries this catalog's range.

Andrew

[IraRat]

I need two that I can use above the doors that can be bent to semicircle to conform to the top of the door. Any ideas?

[Endo]

I use an on-line catalogue (similar to a catalog!) that seems to cover a huge number of RV dealers all round the US. This page shows drip caps.

If you go to http://www.go-rv.com, you can find a local dealer that carries this catalog's range.

Andrew

Thank you! I didn't know the proper term (drip cap). That is exactly what I am looking for!

[Endo]

I need two that I can use above the doors that can be bent to semicircle to conform to the top of the door. Any ideas?

Ira I bought drip rail molding from the Teardrop Fix-it shop for my first teardrop. I was able to bend it to the contour of the door.

Before I attached the door I used it as a "form" to shape the molding.