alaska teardrop wrote:Scott, You could use 1/4" or 3/8" black pipe threaded at both ends located within the chassis. Shortest possible rubber hose to tank regulator. Flexable metal line with shutoff valve to stove. Propane parts store should be able to set you up with safe equipment. Happy trails, Fred - the worlds' farthest North teardrop builder.

I agree, almost all of the campers I have had were plumbed this way, but usually with 1/2" pipe. I did have a pick-up camper that was plumbed with soft copper with flared ends, but it was all ran inside of the campre and not exposed to weather, rocks, etc. The rubber hose will rot after a while, and it's much cheaper replacing the ends than a complete rubber hose. Pre made ends for the bottle side usually run $15-$20 depending on the length, and include the new style (wrenchless) nut. The other problem with the rubber hose is that the rubber hose would be suceptible to chafing.