Table edge t molding & Cove molding

[kurtibm]

I'm hunting for some 3/4" aluminum vintage look table edge t-molding for use on the edge of my counter and flip-down table. (I'd prefer the ribbed variety, like you'd see on a table in a diner) I could also use the plain edge molding that gets nailed into the edge as a second-best option.
And also some aluminum cove molding for use on the joint between the countertop and the walls. I'd like it to run up about 1/2" on the wall+/-.

Has anyone found a good affordable source for these?

Thanks in advance,
Kurt

[prohandyman]

Kurt
Try here
http://www.outwater.com/promo/tees/index.html?OVRAW=outwater%20plastics&OVKEY=plastic%20tee%20mouldings&OVMTC=advanced&OVADID=15943318521&OVKWID=9299051521

[doug hodder]

Here's what I've found on the cove molding, reasonably priced...you be the judge. I haven't found it anywhere else, unless you are buying bulk on it. Mine is on the way, I got the 1/2". It's the look I want. Teardrop-fix-it, used to carry it, but not anymore. Doug

http://www.vintagetrailersupply.com/Mou ... m_s/64.htm

[kurtibm]

Thanks Dan & Doug .... I appreciate the leads .

Doug >> http://www.outwatercatalogs.com/lg_display.cfm/page/378/catalog/2009_master

[doug hodder]

That one never came up in my searches. Oh well. Doug

[bve]

Have you tried Home Depot? I'm sure I've seen it there - at least up here north of the 49th.