It's been a while since I posted build pictures, so this may be a bit of an overload. However, I think it is very neat to see their entire build process.
You can see a lot of work went into the custom stereo system...
Assembling the hatch
Speakers are mounted on hatch
Hatch is trial-fit to check speaker operation
The speakers are added inside
iPod wall dock is mounted
False floor in the left cabinet. Under it, we mounted the amp and other components.
View of the under side of the false floor
[Testing the amp. We had a few problems. We are going to have to get an attenuator to adjust the TV output to make it work with the amplifier
The front is paneled
Side skins are added
Tail lights are wired
Inside showing the paneled front. The furnace ducts are added (silver).
The front is skinned in aluminum.
Sides are skinned and fenders hung.
Cabinets are installed in the kitchen.
Stove is added.
Right cabinet with speaker control.
Back-up camera above the license light.
Roof fan installed.
Front windows installed and propane tank mounted
Installing the sink. counter lids added
Bottom front is panneled.
Roof installed.
I'm guessing there's only about another week before it is finished
Evan