Teardrops n Tiny Travel Trailersor t n ttt for short (tnttt.com) |
incognito teardrop haller
3 posts
• Page 1 of 1
incognito teardrop haller
by glassice » Tue Mar 16, 2010 2:14 am
It time to do the last thing on my bucket list .I want to build a incognito teardrop haller and matching tear and drive to all 4 corners of the us . angib did a plan on a tear that had all the ribs measurements for the space ship tear. What cad do you use to do this on the car it will be 62" hub to hub outside is 73" Thank you 
Last edited by glassice on Tue Mar 16, 2010 7:47 am, edited 2 times in total.
It is not the return ON my investment that I am concerned about; it is the return OF my investment
-
glassice - Silver Donating Member
- Posts: 588
- Joined: Fri Sep 22, 2006 1:23 am
- Location: E nev
are this
by glassice » Tue Mar 16, 2010 2:26 am
I will have to cut ribs to make the buck. The fenders on the back will be kits. on the front will be Grants. On the tear well do a boat rear out board kit fenders web back in to the body 
Last edited by glassice on Tue Mar 16, 2010 7:56 am, edited 3 times in total.
It is not the return ON my investment that I am concerned about; it is the return OF my investment
-
glassice - Silver Donating Member
- Posts: 588
- Joined: Fri Sep 22, 2006 1:23 am
- Location: E nev
