Looking for a Tool - Dont know the name in English

[Classic Finn]

Hey folks. I was trying to look for a tool that makes a cut into tubing the same radius as the tube itself.. Im building the roof rack for our tear and I have a tube and or pipe bending tool however in order to splice into the tube it gives a rounded or diameter equal cut like tube itself.

Im lost in my words for it in English..I went looking for this tool cutter however I cant find anything like it..any name or photo or link would be of help.

I know that the tube can be welded to the other however it would be helpful and easier to do so if the tube is cut at the end to match the radius of that specified adjoining tubing..

Thank You ..

[DasBaldGuy]

Tube Notcher

[starleen2]

Tube Notcher

Yep - that would be it!

[Classic Finn]

Tube Notcher

Man that didnt take long.. Thank You ever so much.. That will most definitely help.

Now to see if I can find one here in the land of Reindeer, Million Saunas and 1.5 Teardrop Trailers

[Classic Finn]

Now to see if I can come up with the name in our language or languages. its a pain when you try to think of things in 3 or 4 languages at the same time.

Whats the price of them any ideas?

[Classic Finn]

Tube Notcher

Yep - that would be it!

Thank You Also Scott

[DasBaldGuy]

Now to see if I can come up with the name in our language or languages. its a pain when you try to think of things in 3 or 4 languages at the same time.

Whats the price of them any ideas?

Depends where you buy them....there are all kinds on the internet and some are "jigs" that use your existing Drill Press others are self-contained tools.

[Classic Finn]

Now to see if I can come up with the name in our language or languages. its a pain when you try to think of things in 3 or 4 languages at the same time.

Whats the price of them any ideas?

Depends where you buy them....there are all kinds on the internet and some are "jigs" that use your existing Drill Press others are self-contained tools.

Iver never used one but I shall give it a try.. as soon as I locate one.

[Classic Finn]

Ok After a bit of searching I found a Finnish Forum that has this topic however to my surprise a guy had ordered one from Harbor Freight USA.

But ok if your into the Finnish Language (Which I Doubt) Its name is
(Viistekone) this took me to some heavy duty industrial machines.. too big of an investment for a roof rack

Im still looking ..

[mikeschn]

Ok After a bit of searching I found a Finnish Forum that has this topic however to my surprise a guy had ordered one from Harbor Freight USA.

But ok if your into the Finnish Language (Which I Doubt) Its name is
(Viistekone) this took me to some heavy duty industrial machines.. too big of an investment for a roof rack

Im still looking ..

As a master of Google, I'm sure you'll find something that works!

Mike...

[afreegreek]

Ok After a bit of searching I found a Finnish Forum that has this topic however to my surprise a guy had ordered one from Harbor Freight USA.

But ok if your into the Finnish Language (Which I Doubt) Its name is
(Viistekone) this took me to some heavy duty industrial machines.. too big of an investment for a roof rack

Im still looking ..

you can use a hole saw and a portable electric drill. I've done it many times with good results. just drill the pilot hole through the pipe first and replace the drill bit in the hole saw with a 1/4" steel rod long enough to go all the way through the pipe. if the pipe is really thin you can use a hole saw made for tile with diamond grit rather than saw teeth.

[Classic Finn]

Ok After a bit of searching I found a Finnish Forum that has this topic however to my surprise a guy had ordered one from Harbor Freight USA.

But ok if your into the Finnish Language (Which I Doubt) Its name is
(Viistekone) this took me to some heavy duty industrial machines.. too big of an investment for a roof rack

Im still looking ..

As a master of Google, I'm sure you'll find something that works!

Mike...

Dont know about that Mike but I just need to translate a few things and then Im on the right track

[Classic Finn]

Ok After a bit of searching I found a Finnish Forum that has this topic however to my surprise a guy had ordered one from Harbor Freight USA.

But ok if your into the Finnish Language (Which I Doubt) Its name is
(Viistekone) this took me to some heavy duty industrial machines.. too big of an investment for a roof rack

Im still looking ..

you can use a hole saw and a portable electric drill. I've done it many times with good results. just drill the pilot hole through the pipe first and replace the drill bit in the hole saw with a 1/4" steel rod long enough to go all the way through the pipe. if the pipe is really thin you can use a hole saw made for tile with diamond grit rather than saw teeth.

I just took a look see in my tools and low n behold I just found my some hole cutter blades..

Im using 20mm aluminum tubing for a test run.. Maybe its strong enough to use for a rack.. if not I have some electrical conduit here too.

Thank you for the info..

[Classic Finn]

Ok After a bit of searching I found a Finnish Forum that has this topic however to my surprise a guy had ordered one from Harbor Freight USA.

But ok if your into the Finnish Language (Which I Doubt) Its name is
(Viistekone) this took me to some heavy duty industrial machines.. too big of an investment for a roof rack

Im still looking ..

you can use a hole saw and a portable electric drill. I've done it many times with good results. just drill the pilot hole through the pipe first and replace the drill bit in the hole saw with a 1/4" steel rod long enough to go all the way through the pipe. if the pipe is really thin you can use a hole saw made for tile with diamond grit rather than saw teeth.

Wow I just took a peek into your gallery and looks like your a pro in wood working. Very Nice Work youve done.
This is what caught my eye.. curious eye that is.

[bbbrt76]

If you are not going to be doing enough to warrant the purchase of a notcher check out this link for another technique using a chop saw
http://pirate4x4.com/forum/showthread.php?t=456800