http://tnttt.com/viewto ... highlight=
The actual rebuild began in march when I received the frame, axle, and wheels back from the sandblaster. I've accomplished quit a bit and I think I have cut my last piece of wood for this project. Below is a pic of the current state. All the wood was coated with CPES prior to assembly and now has 3-4 coats of helmsman. The exterior will be aluminum.
The inside cabinets will have semi circular fronts that open downward like the original rear lower cabinet had all trimmed in t moulding. I even found a great site where you could get the original push button hardware.
http://www.historichouseparts.com/
the rear is fairly straight forward. I'm keeping the ice box, and the rear cabinet door, I plan on hiding all the electrical in there. But I'm adding another small storage compartment in the upper right that will also have a door similar to the rest.
Sorry for not taking more pics of the early build, but hopefully I will keep up and have a good photo journal of it all.
eric
