12 Volt Electrical

Anything electric, AC or DC

12 Volt Electrical

Postby john curtis » Wed May 19, 2010 11:05 pm

Hello everyone.
Was wondering what guage of wire do I use to connect the 30 amp power center to the battery.
Thanks for any help.
John
User avatar
john curtis
Teardrop Master
 
Posts: 175
Images: 141
Joined: Mon May 19, 2008 12:52 am
Location: Edmonton Ab. Canada

Postby Shadow Catcher » Thu May 20, 2010 7:32 am

To be on the safe side I would go with 8 or 10ga (our shore power cord is 10)
User avatar
Shadow Catcher
Donating Member
 
Posts: 6008
Images: 234
Joined: Sat Apr 11, 2009 8:26 pm
Location: Metamora, OH

12 volt

Postby john curtis » Thu May 20, 2010 9:36 pm

Thanks for the info.
User avatar
john curtis
Teardrop Master
 
Posts: 175
Images: 141
Joined: Mon May 19, 2008 12:52 am
Location: Edmonton Ab. Canada
Top

Postby dh » Fri May 21, 2010 7:31 pm

You might have a hard time locating 8g wire. Check the car stereo places, they handle it. Thats what I running from gally to tongue for my 45A power center.
Ignorant doesn't know any better, Stupid knows better but does it anyway.

My build page: http://www.tdbuildlog.blogspot.com/
User avatar
dh
Gold Donating Member
 
Posts: 1647
Joined: Fri Aug 14, 2009 7:08 pm
Location: North East Arkansas
Top

Postby AZSpyder » Fri May 21, 2010 7:43 pm

8 gauge could be a bit of a overkill for 30 amps. I'm running 10 gauge and even 12 gauge would work on shorter runs.

There is a nice chart in this thread:
http://www.tnttt.com/viewtopic.php?t=34942&highlight=battery+wire

Jerry
AZSpyder
Teardrop Master
 
Posts: 127
Joined: Fri Aug 08, 2008 10:49 am
Top

Postby dmckruit » Mon May 24, 2010 1:56 pm

You can always buy a long pair of jumper cables and cut off the ends. I found this was the cheaper alternative to buying the wire individually.
User avatar
dmckruit
The 300 Club
 
Posts: 385
Images: 212
Joined: Thu Jul 10, 2008 1:44 pm
Location: Sarver, PA
Top


Return to Electrical Secrets

Who is online

Users browsing this forum: No registered users and 1 guest